ISO11784/5 FDX-B FDX-A 134.2kHz Handheld Reader, Ideal for Animal Tracking Management
Product details:
Low frequency handheld reader for animal tracking provides a low cost easy-to-use system for animal identification and management
This reader reads compatible RFID tags and displays the tag ID on the screen and stores the data to onboard memory, it also has the capability to upload the data in real time via Bluetooth or RS232 to any enabled PC or PDA
Reader identifies tags meet FDX-B (ISO11784/85), FDX-A (FECAVA), 64-bit R/O (EM) standards
It is with advanced RF transmitter/receiver circuits and embedded micro controller, combines with strict decoding algorithm to receive, verify and read the compatible electronic identification data
High receiving sensitivity, small operating current, easy-carry and cost-effective are the prominent features of the reader
Besides animal tracking these readers are an godo choice for other applications such as logistics, field service, personnel tracking or event management
Features:
Ergonomic design, comfortable and convenient
Compliant with ISO11784/85 standard
Supports FDX-A
Supports FDX-B
Supports EMID format like EM4100, TK4100
Applications:
Poultry management such as chicken, duck, goose and pigeon
Livestock and pets management such as cattle, sheep, dog and cat
High-value fish and aquatic animals management
Pet hospital RFID identification
Goods counterfeiting
Specification:
Standard: FDX-B (ISO11784/85), FDX-A (FECAVA) and 64-bits R/O (EM)
Operating frequency (modulation mode): 134.2kHz
Reading range: 20 to 30cm (30mm RFID ear tag) and 8 to 12cm (L 2 x 12mm bio-glass tag)
Dimension: 280 x 118 x 29mm
Weight: 257.8g
Interfaces: USB and Bluetooth (optional)
Screen display: 2 lines, 16 characters
Memory: 2,000 pieces
Battery: two AA rechargeable batteries, weight 8g(Get right battery according to requirements of company
Other supplier products
|
|
RFID Nail Tags with TK4100 for Trees Management, Compatible with EM4100 |
Suitable for the management of trees, cement/plastic/wood and other non-metallic products
Used in wet and chemical environment for its corrosion-re... |
|
|
HF RFID Module, Developed Based on NXP's Transponder IC, Measuring 86 x 55mm |
Supports ultralight, Mifare mini, Mifare 1k/4k and FM11RF08
Auto real-time detecting tag which moves into or out of detective range and reports thr... |
|
|
HF RFID Module with 13.56MHz Frequency and 4.5 to 5.5V DC Supply Voltage |
Descriptions:
It does auto real-time detecting tag which moves into or out of detective rang and reports through one output pin's logic level
In ad... |
|
|
HF RFID Reader, Can Read/Write Various Tags, Compliant with ISO15693 Protocol |
Operating voltage: 5V (typical)
ESD: 4kV
Frequency: 13.56MHz (HF: high frequency)
Compliant with ISO15693 protocol:
Supports TI RFID tag-IT HF
Supp... |
|
|
RFID UHF Long Range Reader, Can Read and Write, with Adjustable Reading Range |
Features:
Integrated design, compact and easy to install
Built-in 7dBi high gain circularly polarized antenna and stable reading distance
Compatibl... |
All supplier products
Same products
