Fine wire drawing M/C with continuous annealer
Machine type JCJX-24DA
Control system Traditional analog type/By computer digital control
Inverter control Dual Inverter control
Drawing dies No./Max. 24
Inlet diameter Φ0.50-Φ1.00mm
Outlet diameter Φ0.08-Φ0.25mm
Drawing line speed 2500m/min
Slip ratio of m/c 13%
Fix speed capstan slip ratio 8%
Frame Ironed cast
Capstan Ceramic plasma capstan
Main motor 11KW
Spooler motor 3.7KW
Capstan dia.(Max.) Φ242mm
Fix speed capstan dia. Φ206mm
Spool bobbin size Φ300or according to customers requirements
Send-out method Shaft type
Traversing unit synchronous motor +Belt
Transmission type By flat belts
Spooler control PID synchronous spooler
Detecting device Weight balance by swing arm
Tension control Weight balance type
Max .loading capacity 50KG
Lubrication type Spray type
Brake Magnetic brake
Power source 380V 50/60HZ
Lubricant oil capacity 40Liter/40minute
Machine dimension (mm) 2000×1600×1900
Machine weight 2500KG
Other supplier products
|
|
Fine wire drawing M/C with continuous annealer |
Machine type JCJX-24DA
Control system Traditional analog type/By computer digital control
Inverter control Dual Inverter control
Drawing dies No... |
|
|
Rod breakdown machine |
The machine is used for drawing electrical copper rod from 8.0mm to 1.2-4mm, which can be annealed before the outlet wire is wound by the dual take... |
|
|
Intermediate wire drawing M/C with annealer |
Machine type JCJX-9DT Control system Traditional analog type Inverter control Dual inverter control Drawing dies No./max. 9 Inlet diameter 2.5- 3.5... |
|
|
Steel wire drawing machine |
Machine type 560
Drawing dies 6
Inlet diameter Φ6.5 mm
Outlet diameter Φ2.6 mm
Main motor(kw) 18.5
machine weight(kg) 10800
speedm/min 245
B... |
|
|
Rigid frame stranding machine |
The machine is suitable for stranding long length and section bare aluminium,copper and aluminum alloy.
A The machine is suitable for stranding lo... |
All supplier products
Same products
