Annealing and tinning machine
annealing and tinning machine which is produced by our company has gotten national patent. Even if in summer, one person can lie on the annealer tank without feeling hot. Because the temperature of the annealer tank’ surface below 30℃。It is energy-saving machine. We can produce 40 heads at most now.
Machine type JCJX-40H/6M
Length of annealing tank 6m
Wire dia Φ0.10-Φ0.60mm
Pay-off stand By tension wire
Max. speed 300m/min
Tin-coating type Dual furnace by heater
Pay-off bobbin size Φ300or according to customers requirements
Spool bobbin size PT5-PT25 or according to customers requirements
Take-up type Single spooler drive by torque motor
Annealer Continuous annealing by heater
Total power consumption 65KW
Machine dimension 20000×2200×1900
Other supplier products
|
|
Steel wire drawing machine |
Machine type 560
Drawing dies 6
Inlet diameter Φ6.5 mm
Outlet diameter Φ2.6 mm
Main motor(kw) 18.5
machine weight(kg) 10800
speedm/min 245
B... |
|
|
Rigid frame stranding machine |
The machine is suitable for stranding long length and section bare aluminium,copper and aluminum alloy.
A The machine is suitable for stranding lo... |
|
|
Rod breakdown machine |
The machine is used for drawing electrical copper rod from 8.0mm to 1.2-4mm, which can be annealed before the outlet wire is wound by the dual take... |
|
|
Fine wire drawing M/C with continuous annealer |
Machine type JCJX-24DA
Control system Traditional analog type/By computer digital control
Inverter control Dual Inverter control
Drawing dies No... |
|
|
Intermediate wire drawing M/C with annealer |
Machine type JCJX-9DT Control system Traditional analog type Inverter control Dual inverter control Drawing dies No./max. 9 Inlet diameter 2.5- 3.5... |
All supplier products
Same products
