XFP-10G-SR 10Gbps XFP Optical Transceiver
XFP-10G-SR
10Gbps XFP Optical Transceiver
Features:
Supports 9.95Gb/s to 11.3Gb/s Bit Rates；
Maximum link length of 300m (50um,MMF,2000MHz.Km)；
+5V, +3.3V power supply ；
Duplex LC Connector；
Power Dissipation <1.5W；
XFI electrical interface；
No reference clock required；
Excellent EMI performance；
Built-in digital diagnostic functions；
Compliant with RoHS；
Operating Case Temperature Standard: 0~ 70 °C
Application:
10GBASE-SR/SW 10G Ethernet ；
1200-Mx-SN-I 10G Fiber Channel ；
Other optical links
Regulatory Compliance:
|
Feature |
Standard |
Performance |
|
Electrostatic Discharge (ESD) Tothe Electrical Pins |
MIL-STD-883E Method 3015.7 |
Class 1C(>1000 V) |
|
Electromagnetic Interference(EMI) |
FCC Part 15 Class B EN55022:2006 CISPR 22B :2006 VCCI Class B |
Compliant with standards Noise frequency range: 30 MHz to 6 GHz. Good system EMI design practice required to achieve Class B margins. System margins depend on customer host board and chassis design. |
|
Electrostatic Discharge to theenclosure |
EN 55024:1998+A1+A2 IEC-61000-4-2；GR-1089-CORE |
Compatible with standards |
|
Immunity |
EN 55024:1998+A1+A2 IEC 61000-4-3 |
Compliant with standards. 1kHz sine-wave, 80% AM, from 80 MHz to 1 GHz. No effect on transmitter/receiver performance is detectable between these limits. |
|
Laser Eye Safety |
FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 |
CDRH compliant and Class I laser |
Description:
The transceiver module is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 10.3125Gbps(10GBASE-SR) or 9.953Gbps 10GBASE-SW), and transmission distance up to 300m on 50µm MMF (2000MHz.km)；
The transceiver module comprises a transmitter with 850nm a vertical cavity surface emitting (VCSEL) laser and a receiver with a PIN photodiode. Transmitter and receiver are separate within a wide temperature range of 0 to +70 and offers optimum heat dissipation and excellent electromagnetic shielding thus enabling high℃port densities℃ for 10GbE systems.
Send product request
Other supplier products
 |
Media Converter 1000Base-Fx to 1000Base-Tx | Media Converter 1000Base-Fx to 1000Base-Tx Features: Supporting full-duplex and half-duplex transmission modes and capable of automaticnegotiation ... |
 |
Indoor Optical Fiber Cable Ribbon Flat Fiber Cable | Feature: High tensile strength due to aramid strength member； Compact structure, higher fiberdensity and excellentperformance of flexibility and... |
 |
Coarse Wavelength Division Multiplexer (CWDM) | CWDM Coarse Wavelength Division Multiplexer (CWDM) Utilizes Thin Film Coating Technology and Proprietary Design of Non-flux Metal Bonding Micro Op... |
 |
Armored Patch Cord | Armored Patch Cord Features: Low insertion loss and High Return Loss Good durability Good exchangeability High temperature stability compliant wit... |
|
|
Polarization-Insensitive Single/Dual Stage Optical Isolator | Polarization-Insensitive Single/Dual Stage Optical Isolator Features: Low Insertion Loss High Isolation High Return Loss Application: Fiber Laser L... |
Same products
 |
SC/UPC SM Connector | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SM/SCFiber Connector Definition PHX design, develop molds and produce various of kinds of Single... |
 |
Sc Fiber Optic Adapter | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SCFiber Adapter A fiber optic adapter also called a coupler, is a small device designed to termi... |
 |
SC Auto Shutter Connector And Adapter | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Auto Shutter Connector And Adapter SCapc fast connectorfeatures low insertion loss and added ... |
 |
SC Attenuator | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | SC Attenuator Applied to SC-APC optical fiber interface, SC interface and RJ-45 interface look s... |
 |
Remote Optical Fiber Cable | Seller: Shenzhen Puhuixin Tecnhnology Co., Ltd. | Remote Optical Fiber Cable Remote outdoor multimode fiber optic cableis made by placing a layer ... |
