DC Input Motion Sensor Module
DC Input Motion Sensor Module
Standard Motion Sensor Module
5V/12V DC Input Microwave Motion Sensor - Standard Version
HNS101D
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
Features
Input voltage 12V DC (5V & 24V DC version available on request).
Input current:≥25mA.
5V DC PWM output or 0~10V DC signal.
Super compact, flexible to be integrated into any suitable fixtures.
Dual-PD technology, real Daylight monitoring function for built-in application.
8 pin DIP switch setting, multiple options to meet different customer demands.
Detection range up to 12m in diameter.
Mounting height: 3~6m.
Operation temperature; -20℃ ~ + 70℃.
RoHS compliant.
Settings
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time
Hold-time means the time period to keep the lamp on 100% after motion detected.
*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.
Daylight sensor
Daylight sensor means the daylight threshold to enable or disable the sensor function.
"Disable": The sensor works always, even during daylight.
w50lux": The sensor works only in twilight.
w10lux, 2luxw: The sensor works only in the dark.
Stand-by period
This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.
“+∞”： means bi-level dimming control, the fixture never switch off.
Stand-by dimming level
This is the dimmed low light level you would like to have after the hold-time in the absence of people.
Daylight monitoring function
Utilizing the Dual-PD technology, this sensor can tell the difference of natural light and artificial light(lamp) from behind the diffuser, switch on automatically(even without movements) when the ambient light is below target value, and then switch off automatically whenever the artificial light is not required(ambient light is bright enough).
This is the REAL & INTELLIGENT daylight monitoring sensor for built-in installation.
Note: Lux-Off sampling time—30s; Lux-On sampling time—10s.
Lux-On function takes effect only when standby dimming period set at+∞
Send product request
Other supplier products
 |
5V/12V DC Input Microwave Motion Sensor | 5V/12V DC Input Microwave Motion Sensor - Standard Version DC Input Motion Sensor Module Adjustable Motion Sensor Module HNS101 Input voltage 1... |
 |
AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable | AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HN... |
 |
Detachable Version + Remote Controllable AC Input Microwave Motion Sensor | AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable Standard AC Input Motion Sensor Microwave Motion Sensors AC Input HN... |
 |
Microwave Motion Sensor Antenna Module | Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. Patch antenna, antenna gain: 2 dBi. Beam aper... |
 |
Motion Sensor Module DC Input | Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version ... |
Same products
 |
China manufacturer Pressure Gauge HS75668 for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Pressure Gauge HS75668 for power generation It is YOYIK special sale. Deyang ... |
 |
"China factory Vacuum Switch HS70595 for power station | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China factory Vacuum Switch HS70595 for power station Our company mainly serves thermal power pl... |
 |
China made TSI Preamplifier CON021/916-240 for power plant | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | China made TSI Preamplifier CON021/916-240 for power plant Dongfang Yoyik has advanced technology... |
 |
China manufacturer Preamplifier for power generation | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer Preamplifier for power generationIs to use the generator sets of professiona... |
 |
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generatorSold by YOYIK. Dey... |
