.

Remote Control DC Input Motion Sensor

Remote Control DC Input Motion Sensor

Motion Sensor Module DC Input

5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version

HNS112

Input voltage 12V DC (5V & 24V DC version available on request).

Input current:≥25mA.

Features

Input voltage 12V DC (5V & 24V DC version available on request).

Input current:≥25mA.

0~10V DC output signal.

Super compact, flexible to be integrated into any suitable fixtures.

Dual-PD technology, real Daylight monitoring function for built-in application.

IR remote commissioning, easy setting and user friendly.

Detection range up to 12m in diameter.

Mounting height: 3~6m.

Operation temperature: -20°C~ +70°C.

RoHS compliant.

Settings(Remote control IR12)

Permanent ON/OFF function

Press “ON/OFF” button, fixture goes to permanent on or permanent off mode, sensor is disabled.

*press "Auto" ,"Reset" or "Ambient learn" to quit this mode.

Dim +/-

Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.

*after desired brightness is locked down, if user wants to dim again reversely, just press the “Dim” button again and then lock down the new brightness again.

Sensor mode

Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.

Reset function

Press "Reset" button, all settings go back to factory default settings.

Factory default settings--

Sensitivity=100%

Daylight sensor=disable

Hold time=90s

Twilight time=5min

Twilight level=10%

Ambient learn

Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.

Test mode

"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.

Users can quit this mode by pressing "ON/OFF", "Reset' or any button of "Hold time". The sensor settings are changed accordingly.

*Test mode defaulted settings—

Daylight sensor=disable

Hold time=3s

Twilight time=N/A

Twilight level=N/A

In this mode, when used for on/off control, after motion detected, sensor enters into a cycle of 3s on and 2s off. In this mode, when used for tri-level dimming control, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).



Send product request

To: Hynall Intelligent Control Co. Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Highbay DC Input Motion Sensor
Highbay DC Input Motion Sensor 5V/12V DC Input Microwave Motion Sensor – Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB Input vol...
5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version
5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version 5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version Adjustable Motion Sensor Module DC Input Motion Sensor Module HNS103/103D With ...
Motion Sensor Module DC Input
Motion Sensor Module DC Input Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version ...
Microwave Motion Sensor Antenna Module
Microwave Motion Sensor Antenna Module Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. Patch antenna, antenna gain: 2 dBi. Beam aper...
Microwave Sensor
Microwave Sensor Microwave Motion Sensor Antenna Module Microwave Sensor Microwave Motion Sensor HNM01 Low cost. Patch antenna, antenna gain: 2 dBi. Beam aper...
All supplier products

Same products

China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generatorSold by YOYIK. Dey...
Sealing tile gasket GB97.1-85 Generator QFSN-200-2 China turbine parts
Sealing tile gasket GB97.1-85 Generator QFSN-200-2 China turbine parts Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "Sealing tile gasket GB97.1-85 Generator QFSN-200-2 China turbine partsDeyang Dongfang Yoyik is a...
Magnetic Sensor Connector
Magnetic Sensor Connector Seller: ALIF TECH. CO., LTD. Connector: Housing made of plastic. The ALIF magnetic sensor connector types are put into the ad...
PD Adjustable Sensor Mounting Brackets
PD Adjustable Sensor Mounting Brackets Seller: ALIF TECH. CO., LTD. Special for DFGE/AG-39 series, PD Adjustable Sensor Mounting Bracketsare fixed to profile cylinde...
PBC Sensor Connector
PBC Sensor Connector Seller: ALIF TECH. CO., LTD. Special for DFGH/AG-26/AG-27 series, PBC adapter can be fixed on round cylinder. Features of P...