.

Remote Control Microwave Sensor

Remote Control Microwave Sensor

Microwave Motion Sensors AC Input

AC Input Microwave Motion Sensor - Detachable Version + Remote Controllable

HNS205

Operating voltage: 120〜277V AC, 50/60Hz.

Rated load: 400W @ 120VAC, (capacitive)Features

•5.8GHz C-band microwave motion sensor, tri-level dimming control.

•Operating voltage: 120〜277V AC, 50/60Hz.

•Rated load: 400W @ 120VAC, (capacitive)

•800W @ 200〜277VAC, (capacitive)

•Stand-by power: <1w.

•Particularly designed for fixtures which with limited space, ideal for LED panels, linear office lights with metal louvres, compact bulkheads, etc. Hide the sensor body and configure the small detached antenna head only.

•Dual-PD technology, real Daylight monitoring function for built-in application.

•Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay.

•DIP switch + IR Remote control 2 channels setting. Automatically override each other upon the latest operation.

• RJ11 connection between the sensor body and antenna head, easy plug and play.

• Detection range up to 12m in diameter.

•Mounting height: 3~6m.

• Operation temperature: -20℃~ + 70℃

• IP rating: IP20.

Settings(DIP switch)

Detection range

Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.

Hold-time

Hold-time means the time period to keep the lamp on 100% after motion detected.

*when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for users to choose the desired detection range. In this mode, the daylight sensor is disabled, when there is no motion, fixture keeps off, when there is motion detected, fixture keeps a cycle of 3s on and 2s off.

Daylight sensor

Daylight sensor means the daylight threshold to enable or disable the sensor function.

"Disable":The sensor works always, even during daylight.

"50lux": The sensor works only in twilight.

"10lux, 2lux": The sensor works only in the dark.

Stand-by period

This is the time period that the lamp remains at a low light level before it is completely switched off in the long absence of people.

"+∞": means bi-level dimming control, the fixture never switch off.

Stand-by dimming level

This is the dimmed low light level you would like to have after the hold-time in the absence of people.

*0% means on/off control.

10%--Vdim=1.5Vdc 30%--Vdim=3.0Vdc 50%--Vdim=5.0VdcSettings(Remote control IR12)

Permanent ON/OFF function

Press "ON/OFF" button, fixture goes to permanent on or permanent off mode, sensor is disabled.

*press "Auto", "Reset" or "Ambient learn" to quit this mode.

Dim +/-

Press "Dim" button to automatically dim up or down the light brightness during hold-time from 10% to 100%. Another press to lock it down when desired brightness is achieved.

*after desired brightness is locked down, if user wants to dim again reversely, just press the wDimw button again and then lock down the new brightness again.

Sensor mode

Press "Auto" button, the sensor starts to work and all settings remain the same as the latest status before the light was switched on/off.

Reset function

Press "Reset" button, all settings go back to the value of DIP switch settings.

Ambient learn

Press "Ambient learn" button, the latest surrounding lux value overwrites previous lux value learned, and set as the daylight threshold. This feature enables the fixture to function well in any real application circumstance.

Test mode

"Test mode" is for testing purpose only, for users to check the functionality and choose the desired detection range. The sensor goes to test mode automatically after pressing this button.

Users can quit this mode by pressing "ON/OFF", "Reset", or any button of "Hold time" The sensor settings are changed accordingly.

*Test mode defaulted settings—

Daylight sensor=disable

Hold time=3s

Twilight time=N/A

Twilight level=N/A

In this mode, after motion detected, sensor enters into a cycle of 3s on and 2s off(0.5s soft off + 1.5s off).



Send product request

To: Hynall Intelligent Control Co. Ltd
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Highbay DC Input Motion Sensor
Highbay DC Input Motion Sensor 5V/12V DC Input Microwave Motion Sensor – Highbay Version DC Input Motion Sensor Module Highbay DC Input Motion Sensor HNS111HB Input vol...
5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version
5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version 5V/12V DC Input Microwave Motion Sensor - VR Adjustable Version Adjustable Motion Sensor Module DC Input Motion Sensor Module HNS103/103D With ...
DC Input Motion Sensor Module
DC Input Motion Sensor Module DC Input Motion Sensor Module Standard Motion Sensor Module 5V/12V DC Input Microwave Motion Sensor - Standard Version HNS101D Input voltage 12...
AC Input Microwave Motion Sensor - Standard Version
AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensor - Standard Version AC Input Microwave Motion Sensors Microwave Motion Sensors AC Input HNS201 Operating voltag...
Remote Control DC Input Motion Sensor
Remote Control DC Input Motion Sensor Remote Control DC Input Motion Sensor Motion Sensor Module DC Input 5V/12V DC Input Microwave Motion Sensor – Remote Controllable Version ...
All supplier products

Same products

China manufacturer Pressure Gauge HS75668 for power generation
China manufacturer Pressure Gauge HS75668 for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Pressure Gauge HS75668 for power generation It is YOYIK special sale. Deyang ...
China factory Vacuum Switch HS70595 for power station
"China factory Vacuum Switch HS70595 for power station Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China factory Vacuum Switch HS70595 for power station Our company mainly serves thermal power pl...
China made TSI Preamplifier CON021/916-240 for power plant
China made TSI Preamplifier CON021/916-240 for power plant Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD China made TSI Preamplifier CON021/916-240 for power plant Dongfang Yoyik has advanced technology...
China manufacturer Preamplifier  for power generation
China manufacturer Preamplifier for power generation Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China manufacturer Preamplifier for power generationIs to use the generator sets of professiona...
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator
China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generator Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD "China Yoyik Upper bearing positioning sleeve DLD320-20X2 for turbine generatorSold by YOYIK. Dey...