6pins Digital Passive Infrared Sensor BS612
Senba Sensing Technology Co.,Ltd. is a professional china sensor manufacturer. We provide Infrared Thermopile Sensor, Digital PIR Sensor, passive ir motion sensorand so on. Want to know about china infrared sensorand lcr 0202 datasheet? Please contact us.
Overview
Senba Pyroelectric Infrared Sensors with high sensitivity, low noise and reliable performance. We have our own research and development department, with international technology and Hybrid IC technique expertise developed more than 15 years. The goods come standard with enhanced immunity to RFI (Radio Frequency Interference) bs612and 2.4G high frequency interference. Senba PIR bs612sensor suppport delay time, sensitivity adjustable, lighting adjustable.
Features
Schmidt REL output
Low voltage, low power consumption, instantaneous settling after power up
Technical Data
- Maximum Ratings
|
Characteristics |
Symbol |
Unit |
Remarks |
||||
|
Supply Voltage |
VDD |
-0.3 |
V |
||||
|
Working Temperature |
TST |
-20 |
85 |
℃ |
|||
|
Into |
-100 |
100 |
mA |
||||
|
Storage Temperature |
TST |
-40 |
125 |
℃ |
|||
|
Characteristics |
Symbol |
Type |
Unit |
Remarks |
|||
|
Supply Voltage |
VDD |
3 |
V |
IR=0.5mA |
|||
|
Working Current |
IDD |
9 |
11 |
μA |
|||
|
Sensitivity |
VSENS |
90 |
2000 |
μV |
|||
|
Output REL |
|||||||
|
Output Low Current |
IOL |
10 |
mA |
VOL<1V |
|||
|
Output High Current |
IOH |
-10 |
mA |
VOL>(VDD-1V) |
|||
|
Lock time |
TOL |
2 |
s |
||||
|
On-time |
TOH |
2 |
4793 |
s |
|||
|
SENS/ONTIME |
|||||||
|
Input voltage |
0 |
VDD |
V |
0VtoVDD/2 |
|||
|
Input Bias Current |
-1 |
1 |
μA |
||||
|
OEN |
|||||||
|
Input Low Voltage |
VIL |
Vdd |
|||||
|
Input High Voltage |
VIH |
Vdd |
|||||
|
Input Current |
II |
-1 |
1 |
μA |
VSS<VIN<VDD |
||
|
Oscillator & Filter |
|||||||
|
Low pass filter cut-off frequency |
7 |
Hz |
|||||
|
High pass filter cut-off frequency |
Hz |
||||||
|
Oscillator frequency on Chip |
FCLK |
64 |
kHz |
||||
|
Interior Block Diagram |
|||||||
Applications
start air conditioning or turn on the lights.
Toys
Digital photo frame
TV, Refrigerator, Air-conditioner
FAQ
Five Causes of PIR False Alarms. The first cause of PIR false alarms is low or unstable voltage at the detector. Test to make sure the voltage at each PIR is above 13VDC and stable. The second cause of false alarms is sudden infrared movement / heat changes in view of the detector.
When the sensor is idle, both slots detect the same amount of IR, the ambient amount radiated from the room or walls or outdoors. When a warm body like a human or animal passes by, it first intercepts one half of the PIR sensor, which causes a positive differential change between the two halves.
Send product request
Other supplier products
 |
4 Pins Passive Infrared Sensor BL412 for Alarm System | Overview Senbais the specialist PIR manufacturer for more than 15 years. We are the most advanced factory with complete categories. With strong R&... |
 |
HDPE Pir Motion Detector Lens S9006 for PIR sensor Module | With our own R&D Center, SenbaSensor can do a lot of basic research, and develop our chinese pirsensor and other products with our unique techn... |
 |
SB412 High Sensitivity Digital PIR Modlue for Light Control Lamp | Overview of mini ir pyroelectric infrared pir motion human body sensor module PIR(Passive Infrared Detection) are used to detect motion of human mo... |
 |
4 Pins Passive Infrared Sensor BL412 for Alarm System | Senba Sensing Technology Co.,Ltd. is a professional pir sensor manufacturers. We provide Infrared Thermopile Sensor, Digital PIR Sensor, intelligen... |
 |
PIR Sensors Used in Security Alarms and Automatic Lighting Applications D205B | Overview D205B is widely used for ceiling lamps and has a large detection angle.The pyroelectric infrared sensor detects infrared radiation on the... |
Same products
 |
T60404-N4646-X400 | Seller: 双为（香港）科技有限公司 | Manufacturer: Vacuumschmelze Product Category: Board Mount Current Sensors ... |
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir... |
 |
Hangzhi CIT High Precision Split Core current transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CIT series high precision split core current transducer is developed by Hangzhi based on the ... |
 |
BMS300 Automotive Current Sensor Transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under no... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the appli... |
