AG-59 Magnetic Cylinder Sensor
AG-59 series ac magnetic field sensor
The AG-59 series is optimized in the housing length of the AG-49 series, and inherits the characteristics of the AG-49 series' high versatility, convenient installation and firmness. It is the preferred magnetic switch for short-stroke standard cylinders.
Specification ofAG-59 Magnetic Cylinder Sensor
|
Model |
AG-59 DF |
AG-59 N |
AG-59 P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～100 mA |
|
|
Switch Rating |
3W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ3.3, 2C, Grey Oil-Resistant PVC |
Φ3.3, 3C, Grey Oil-Resistant PVC |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (GB/T4208-2017) |
IP68 (GB/T4208-2017) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Sensor is mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensortype, there are different installation methods.
Send product request
Other supplier products
 |
PD Adjustable Sensor Mounting Brackets | Special for DFGE/AG-39 series, PD Adjustable Sensor Mounting Bracketsare fixed to profile cylinder below φ100. PD Adjustable Sensor Brackets... |
 |
PS Sensor Connector | Special for DFGH/AG-26/AG-27 series, PS adapter and magnetic sensor for pneumatic cylindercan be used together Suitable for SMC T-slot cylinder. ... |
 |
PBN Sensor Clamp | Special for DFGH/DFGG series, PBN Clamp is fixed on full bore Round cylinder. Specification of PBN Clamp in Sensor Brand ALIF ... |
 |
PO Sensor Bracket | Proximity Sensor Mounting Special for AG-49/AG-59 series, PO Bracket is fixed on the profile cylinder of φ32～φ100. Specification of PO Se... |
 |
Sensor Clamp | The length of the steel belt can be adjusted. The appropriate steel belt length can be selected according to the size of the cylinder bore. Firml... |
Same products
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CAFR-A-NP series is a current sensor developed by Hangzhi that can be soldered on the PCB cir... |
 |
Hangzhi CIT High Precision Split Core current transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | The CIT series high precision split core current transducer is developed by Hangzhi based on the ... |
 |
BMS300 Automotive Current Sensor Transducer | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300 fluxgate transducer is made of an excitation magnetic ring and a control circuit. Under no... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG has a high gain and measurement accuracy in the full bandwidth range, due to the appli... |
 |
DIT300-SG high-precision digital current sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | Hangzhi DIT300-SG is a 300 Amp High Precision Digital Current Transducer with an accuracy of 200p... |
