AG-59 Magnetic Cylinder Sensor
AG-59 series ac magnetic field sensor
The AG-59 series is optimized in the housing length of the AG-49 series, and inherits the characteristics of the AG-49 series' high versatility, convenient installation and firmness. It is the preferred magnetic switch for short-stroke standard cylinders.
Specification ofAG-59 Magnetic Cylinder Sensor
|
Model |
AG-59 DF |
AG-59 N |
AG-59 P |
|
Switching Logic |
Normally Open |
Solid State Output, Normally Open |
|
|
Output Type |
2 Wire Solid State |
NPN Current Sinking |
PNP Current Sinking |
|
Voltage Range |
10～30V DC |
5～30V DC |
|
|
Sensor Current |
1～50 mA |
0～100 mA |
|
|
Switch Rating |
3W Max. |
||
|
Consumption |
/ |
3 mA Max.@24V |
|
|
Voltage Drop |
|||
|
Leakage Current |
90 μA Max.@28V |
||
|
Indicator |
Red LED |
Red LED |
Green LED |
|
Cable |
Φ3.3, 2C, Grey Oil-Resistant PVC |
Φ3.3, 3C, Grey Oil-Resistant PVC |
|
|
Sensitivity |
40～800 Gauss |
40～800 Gauss |
|
|
Sensor Frequency |
900Hz |
900Hz |
|
|
Temperature |
-10～70℃ |
-10～70℃ |
|
|
Shock |
50G |
50G |
|
|
Vibration |
9G |
9G |
|
|
Ingress Protection |
IP68 (GB/T4208-2017) |
IP68 (GB/T4208-2017) |
|
|
Protection Circuit |
Surge Suppression |
Power Reverse Polarity; Surge Suppression |
|
|
CE Certificate NO. |
E8A 17 04 53334 007 |
E8A 17 04 53334 008 |
|
|
CNEx Certificate NO. |
|||
|
RoHS 2011/65/EU & (EU) 2015/863 |
|||
|
Reach NO. |
(EC) N 1907/2006 (REACH) |
||
ALIF Sensor is mounted on the cylinder block and will indicate "on" or "off" depending on the proximity to the magnet. Depending on the application, a variety of different magnetic proximity sensor technologies can be used to maximize performance, space, and reliability. According to the ALIF sensortype, there are different installation methods.
在线联系供应商
Other supplier products
 |
PCF Sensor Bracket | 18mm Sensor Mounting Bracket For AG-49/AG-59 series only, PCF Bracket is fixed to the tie rod cylinder below φ250～φ320. 18mm Sensor B... |
 |
AG-22 Magnetic Cylinder Sensor | AG-22 series magnetic sensor AG-22 series is specially used for AIRTAC 4.35*4.5 square groove, the top outlet design gives the equipment more la... |
 |
AG Series Magnetic Cylinder Sensor | AG Series: Green Protecting the environment is our mission and striving for a green home. IP68 Suitable for a variety of extreme environments... |
 |
AG-26 Magnetic Cylinder Sensor | AG-26 series magnetic sensor AG-26 series is generally used for 4φ diameter C-shaped grooved cylinders. There are six specifications such as... |
 |
AG-01 Magnetic Cylinder Pneumatic Reed Switch Sensor | AG-01 series pneumatic reed switch sensor The new AG-01 magnetic reed switch for pneumatic cylinderseries is suitable for AIRTAC 4.35*4.5 square g... |
Same products
 |
Hangzhi CAFR-A-NP Series PCB Current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CAFR-A-NP系列是航智自主研发的可焊接在PCB电路板上的电流传感器，基于磁通门技术，可实现直流电流和交流电流的隔离测量。 测量范围：±6A至±50A。精度：&... |
 |
Hangzhi CIT High Precision Split Core current transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | CIT系列高精度分体式电流传感器是航智基于磁通门技术开发的，可实现直流电流和交流电流的隔离测量。 测量范围：±100A至±1500A。精度：0.05%。线性度：0.... |
 |
BMS300 Automotive Current Sensor Transducer | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | BMS300磁通门传感器由励磁磁环和控制电路组成，正常情况下，控制电路产生固定的励磁电流频率，使磁芯交替处于最大饱和点，当测量电流流过时，通过检测饱和点的对称性来测量一次电流。 BMS系列适用... |
 |
AIT6000-SG High-Precision Current Sensor Transducer, Accuracy 50ppm | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | AIT6000-SG在现有的直流传感器技术基础上，采用了多点零磁通技术体系和高频纹波传感通道，在全带宽范围内具有较高的增益和测量精度。 关键技术励磁闭环控制技术自励退磁技术多点零磁通技术温控补... |
 |
DIT300-SG high-precision digital current sensor | 卖方: Shenzhen Hangzhi Precision Electronics Co., Ltd | 航智DIT300-SG是一款300安培高精度数字电流传感器，精度为200ppm（200百万分之一）。 该高精度直流传感器采用多点零磁通技术体系，实现了励磁磁通、直流磁通、交流磁通的零磁通闭环控... |
