Resin Pastillator

Resin PastillatorProduct introduction:The liquid is fed by means of a jacket pump from the storage tank to the drop former by jacket piping. These piping are heated by hot oil. The pastillation unit consists of a drop-former and a steel belt cooler. The drop former is designed according to the Refeedbar patented for REBO and consists of stator which is supplied with liquid product and a perforated rotating outer shell which turns concentrically around the stator depositing resin drops across the whole belt width. circumferential speed of the drop former is synchronized with the speed of the belt cooler. The drops are therefore deposited on the belt without deformation and,Website:, after solidification, result in regular pastilles with an optimum shape. The heat released during solidification and cooling is transferred by the stainless steel belt to the cooling water indirectly. This is sprayed against the belt underside, collected in tanks, and returned to the re-cooling plant, In no phase the cooling water gets in contact with the resin. At the cooler end the pastilles are taken off with a discharge knife and pass via chutes to a bagging system. The diameter of pastilles is about 4-6mm and its height is about 2.5-3.5mm. The width of the complete machine is 1800mm and 2100mm and its length is 18m, 25.5m, 30.5m and 33m. The output of single machine is 1000kg/hr, 1500kg/hr, 2000kg/hr and 3000kg/hr. It can be matched with semi-automatic or full-automatic packing machine to complete automatic packing and stacking.Product advantages:● The maximum capacity of single machine reaches up to 3000kg/hr, the biggest one in the world;● National registration mark for Refeedbar type granulator;● The innovation technology based on the introduction and ingestion of Germany granulator technology;● The sole company in the domestic has passed united technology assessment by SINOPEC technology development center and the introduced major equipment domestication office, belonging to ministerial appraisal;● Pastilles is plump, and with good flowability;● The cooling water and product not contacting mutually, cooling water is not polluted by product;● Less wearing parts for equipment, low operation cost, stable quality and low fault rate;● Continuous steel belt and equipment overall package ensure that steel belt does not deviate and damage V rope;● Up to now, renewed 30 imported Germany machines, and 3 American machines.Main achievements: 1. Shangdong Qilong; 2. Lanzhou Petrochemical; 3. Lanzhou Huifeng; 4. Fushun Qilong; 5. Nanjiang Qidong; 6. SINOPEC Nahua Group; 7. Daqing Huake.

Other supplier products

	Steel Belt Drum System	There are drums on the tight end and drive end for each,Website:, whose diameter is 1000mm. Both sides of the drum use material Q235, with orange a...
	Drop Former Metering Bar	Production inside the stator needs to distribute uniformly,Website:, which can be completed by the metering bar. The metering bar is installed in t...
	Sulfur Pastillator	Sulfur pastillatorProduct introduction:The liquid sulfur is fed by means of a jacket pump from the storage tank to the drop former by jacket piping...
	Steel Belt	Granulator for steel belt and the difference between non-exclusive steel beltSHANGHAI REBO GRANULATOR company limited based on the principle of res...
	Release Agent	REBO Granulator Agent (RB-4)The RB-4 Agent is a kind of emulsion containing surfactant,Website:, the product can effectively prevent the adhesion o...

All supplier products

Same products

	INTERFLON Food 2 Grease for the lubrication of foodstuff machines 400ml	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	Intended for the general lubrication of machine parts with slow to medium-fast movements and ligh...
	YAMADA MMG-80 MP 85ml for Bearing Sliding Parts	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	It is a heat-resistant, extreme pressure, water resistant, durable, lithium soap universal grease
	Mobil Grease Unirex N3 for High-Temperature Service in Rolling-Element Bearings	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	The Mobil Unirex N 3 Bearing Greaseprovides exceptional performance
	Double Column PV Mounting	Seller: Taizhou Dongsheng New Energy Technology Co., Ltd.	Double Column PV Mounting adopts a symmetrical double column structure, and the overall rigidity ...
	Coltri oil ST 755 Fully Synthetic compressor oil 1L Food Grade lubrication	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	COLTRI OIL ST 755 is a fully synthetic oil specifically developed for long durations of process g...