Ultra Pure Water Equipment

Ultra pure water equipmentIndustrial reverse osmosis deviceNearly complete removal of the conductive medium in the water, and the water does not dissociation of colloidal substances, gases and organic matter are removed to a very low degree of water. The resistivity is greater than 10 ~ *cm 18.3M limit value. Ultra pure water, pure water machines and equipment in general difficult to achieve, usually by pre treatment, reverse osmosis technology, ultra purification treatment and after treatment of four steps, multi-stage filtration, high performance ion exchange (polished), ultrafiltration filter and UV lamp, in addition to the TOC device, such as a variety of treatment methods, the resistivity up to 18.25M Omega column with a.The process of preparing industrial ultra pure water is roughly divided into the following:（1）Traditional water by ion exchange resins in the preparation of ultra pure water treatment, the main process: raw water, sand carbon filter, precision filter, Yang bed, anion bed, mixed bed (double bed), pure water tank, water pump, post precision filter, water .（2）By use of reverse osmosis water treatment equipment and ion exchange equipment combination way and the main process: raw water, sand carbon filter, precision filter, reverse osmosis equipment, pure water tank, the mixed bed (double bed), ultra pure water, ultra pure water pump, post precision filter, water.（3）Preparation technology of reverse osmosis water treatment equipment and electrodeionization (EDI) equipment to match the way, which is a preparation of ultra pure water of the latest technology and environmental protection, economic, development potential huge super ultrapure water and the main process: raw water, sand carbon filter, precision filter, anti penetration equipment, pure water tank, electrodeionization (EDI), ultra pure water, ultra pure water pump, post precision filter, water.Three preparation industry with ultra pure water process is the preparation of electronic industry with ultra pure water technology is more than three, the rest of the process is mostly on the basis of the above three kinds of basic process of different combination collocation derivative.The advantages and disadvantages of them are listed below：（1）The first ion exchange resin has the advantages of less initial investment, less occupied place, but the drawback is that the need to often carry out ion regeneration, consuming a large amount of acid and alkali, and the environment has a certain damage.（2）Second using reverse osmosis as pretreatment with ion exchange equipment and its characteristics for early investment than by ion exchange resin is higher, but equipment ion regeneration cycle is relatively long, the consumption of acid and alkali than simply using ion exchange resin to a lot less. But there is a certain damage to the environment..（3）The third kind of the reverse osmosis pretreatment and then with electrodeionization (EDI) device, which is currently producing ultra pure water the most economical, most environmental protection for the production of ultra pure water process, do not need to regenerated with acid and alkali can be continuously producing ultra pure water, not what destructive to the environment. The disadvantage is that the initial investment is too expensive in two ways.

Other supplier products

	Ultra Pure Water Equipment	Ultra pure water equipmentIndustrial reverse osmosis deviceNearly complete removal of the conductive medium in the water, and the water does not di...
	Pure Steam Generator	Pure steam generatorTypical applications：Purified water distribution system,Website:, heat exchanger, cooling heat exchanger, heat exchanger.njecti...
	Water For Injection Equipment	Electric heating type distilled water machine Product features （1）The whole equipment is made of 316L stainless steel,Website:, the working surf...
	EDI Equipment	EDI equipmentBrief introduction：EDI is a kind of pure water manufacturing technology which combines ion exchange technology, ion exchange membrane ...
	EDI System	EDI equipmentBrief introduction：EDI is a kind of pure water manufacturing technology which combines ion exchange technology, ion exchange membrane ...

All supplier products

Same products

	INTERFLON Food 2 Grease for the lubrication of foodstuff machines 400ml	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	Intended for the general lubrication of machine parts with slow to medium-fast movements and ligh...
	YAMADA MMG-80 MP 85ml for Bearing Sliding Parts	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	It is a heat-resistant, extreme pressure, water resistant, durable, lithium soap universal grease
	Mobil Grease Unirex N3 for High-Temperature Service in Rolling-Element Bearings	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	The Mobil Unirex N 3 Bearing Greaseprovides exceptional performance
	Double Column PV Mounting	Seller: Taizhou Dongsheng New Energy Technology Co., Ltd.	Double Column PV Mounting adopts a symmetrical double column structure, and the overall rigidity ...
	Coltri oil ST 755 Fully Synthetic compressor oil 1L Food Grade lubrication	Seller: Dongguan Fuxiaojing New Materials Technology Co., Ltd	COLTRI OIL ST 755 is a fully synthetic oil specifically developed for long durations of process g...