Pelton Turbine
Pelton Turbine
Pelton turbine is suitable for medium and high water head power plants. The key components are: Pelton runner, main shaft and Nozzle assembly.
Shenyang Getai Hydropower Equipment Co.,Ltd is located in Shenyang City, the old Northeastern industrial base of China. GETAI is a high technology enterprise established in 1992, aiming to supply integral solution for new and old hydropower plants. Its main products include , Francis turbine, Kaplan turbine and relevant accessories.main products: , ,Pelton Turbine Formula,, , Francis Turbine Generator, , welcome to our factory!
Application Scope: Alcance de aplicación:
|
Water Head: |
100 ~ 1700m |
|
Output: |
|
|
Frequency:Frecuencia: |
50/60HZ |
|
Runner Diameter: |
|
Getai Hydropower is one of the leading Pelton Turbine manufacturers. Our Pelton Turbine Generator, Pelton Turbine Efficiency, Pelton Runnerhas high quality and competitive price, and you can see the Application Of Pelton Turbine.
CFD analysis for Pelton turbine is performed in order to predict the turbine performance. The head loss in the collecting pipe and injector assembly is calculated based on CFD analysis results.
The relation of needle stroke and flow also can be calculated. CFD analysis can improve injector and nozzle design to reduce head los. The flow curve relative to needle stroke can be drawn based on analytical data.
CFD analysis can simulate the whole procedure which flow coming into and outgoing from bucket. The flow visualization can clearly show whether water flow outgoing from bucket pressure side hit the bucket back side. Such flow situation will cause more hydraulic loss and should be avoid during runner bucket optimum design process. The torque generated by runner and pressure distribution in the bucket can be calculated based on CFD analysis results. Turbine output and efficiency is finally predicted for various operating points.
Shenyang Getai Hydropower Equipment Co.,Ltd main products: Pelton Turbine, Francis Turbine, Kaplan Turbine, Tubular Turbine, Pelton Turbine Generator, Francis Turbine Generator, Double Francis Turbine, Pelton Turbine Formula, welcome to our factory!
The possible location of cavitation can be predicted based on the pressure distribution in the bucket. The phenomena of cavitation should be avoided in the back tip of splitter by optimum design for back shape of splitter.
Chemical Composition for ASTM A473 S41500 and ASTM A743 CA6NM（%）
|
Material No. |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
|
ASTM A473 S41500 |
≤0.05 |
≤0.60 |
≤0.030 |
≤0.030 |
||||
|
ASTM A743 CA6NM |
≤0.06 |
≤0.040 |
≤0.030 |
Mechanical Property for ASTM A473 S41500 and ASTM A743 CA6NM
|
Material No. |
σ0.2(Mpa) |
σb(Mpa) |
δ5(%) |
ψ(%) |
Akv(J/cm2) |
HB |
|
ASTM A473 S41500 |
≥620 |
≥795 |
≥15 |
≥45 |
≥50 |
≤295 |
|
ASTM A743 CA6NM |
≥550 |
≥755 |
≥15 |
≥35 |
≥50 |
≤285 |
More information please view here.
Send product request
Other supplier products
 |
Francis Turbine Generator | Francis Turbine Generator Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water hea... |
 |
Hydro-turbine Units for Serbian Six Small Hydropower Station Renovation Project | This project consists of six hydropower stations, and our company is responsible to provide hydro-turbine products, including Pelton turbine runner... |
 |
Forged Entire CNC Machined Francis Runner | Forged Entire CNC Machined Francis Runner Forging could considerably improve metal’s organizational structure and mechanical property. For... |
 |
Kaplan & Tubular Turbine | Kaplan & Tubular Turbine Kaplan Turbine is suitable for medium & low water head and large flow power plants. With same water head, the Kap... |
 |
Francis Turbine Generator | Francis Turbine Generator Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water hea... |
