.

Air Suspension Centrifugal Blower ZENGKUN

ZCJSD Product Description The Turbo Blower Is Composed Of An Air Bearing, A Base, A Permanent Magnet Synchronous Motor, A Variable Frequency Controller, And A Self-Cooling System, And Is Equipped With An Air Filtering Device And An Exhaust Valve Muffler. Due To The Air Suspension Bearing Technology, The Fan Bearing Has Large Frictional Vibration, Low Heat Dissipation Capability And Noise Of Less Than 80 Decibels. Therefore, There Is No Need To Install Lubricating Oil Devices And Gas, Oil And Water In The Piping System, And There Is No Need To Set Up Special Audio Equipment. Air Bearing - No Oil Required - No Vibration - Low Noise (75db-80db) - No Maintenance Required (Just Change The Filter) High Efficiency Inverter And (BLDC) Permanent Magnet Brushless DC Motor. - The Electricity Bill Is Reduced By 30-50% Compared To The Roots Blower. - The Electricity Bill Is Reduced By 20% Compared To The Original Centrifugal Fan. - Semi-Permanent Life High Efficiency Stainless Steel 630 Impeller Is Used. -The Impeller Life Can Be Maintained For 30 Years - Impeller Efficiency Up To 92% Product Features 1. Energy Efficient. High-Efficiency Impellers And Ultra-High-Speed Motors Use Direct Connections From Air Bearings To Remove The Gearbox And Lubrication System Without Mechanical Contact, Vibration, Low Noise, And No Sound Insulation. The Brushless DC Motor And The Variable Frequency Speed Control System Are Adopted To Adjust The Speed Regulation Flow And Pressure, And Maintain High Efficiency Within The Working Flow Range Of The Fan. 2. Save Space And Reduce Investment In Supporting Facilities. The Smallest Fan Room Area, Light Weight, Simple Structure, No Installation And Hoisting Device. At The Same Time, Convenient Layout Can Be Selected According To Needs, Such As Blowing The Fan Room Directly On The Aeration Tank, Saving Pipeline Investment And Reducing Pipeline Resistance Loss. Three. The Operation Is Simple And The Degree Of Automation Is High. The Fan Itself Performs Self-Test On The Speed, Pressure, Temperature And Flow To Prevent Surge And Achieve Unmanned Operation. In The Fan Working Area, The Air Volume And Wind Pressure Output Can Be Adjusted Freely According To The External Control Signal. There Is No Need For Local Control Cabinet And Soft Start Cabinet. The Fan Itself Integrates The Local Control System. The Main Control Panel Set In The Fan Room Can Automatically Adjust The Pressure, Flow, Control Opening And Fault Alarm Through The Computer CP U To Realize Single And Multiple Simultaneous Automation. . C Control Operation. It Can Also Be Controlled By A Remote Central Control Room. Through Simple Training, The Relevant Technicians Can Automatically Put Into Operation And Operate Unmanned According To The Procedures Of The Operation Manual. 4. Equipment Reliability Is High. Ultra-High Speed (BLDC) Motor And HAFB (Hydraulic Dynamic Foil Bearing) Dynamic Air Bearing Technology (Gearbox Removal, Oil Lubrication System, Complex Control System Failure), High-Quality Materials For Key Parts (Impact SUS630 High-Strength Stain) Reduce The Use Of Steel And Axial Titanium Materials); Through Standardized Production, To Ensure Stable, High Performance And High Reliability.



Send product request

To: Henan Zengkun Machinery Equipment Co.,ltd.
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

RU Series Cross Roller Bearing
RU Series Cross Roller Bearing RU Series Cross Roller Bearings Are Designed As An Integral Structure For Inner And Outer Rings. Because The Inner And Outer Rings Have Machined In...
Hydrogen Fuel Cell Air Compressor
Hydrogen Fuel Cell Air Compressor Based On Many Years Of Experience In Air Suspension Fluid Machinery, Zengkun Launched Research And Development On The Cutting-Edge Technology Of Fu...
Thin Section Sealed Four Point Contact Ball Bearing
Thin Section Sealed Four Point Contact Ball Bearing A GOTHIC ARCH assembled bearing designed with seal for applications involving multiple loads.Unique internal geometry permits application of radial...
slim thin section bearing china kaydon replace
slim thin section bearing china kaydon replace Precision Engineering Precision Bearings Are Made Of Stainless Steel And Are Corrosion Resistant. Ball Bearings Only 2.5 Mm Wide Have Apertures Ran...
Thin Section Angular Contact Ball Bearing
Thin Section Angular Contact Ball Bearing Angular Contact Bearing With Reduced Shoulder On One Side Of Inner Or Outer Race Ball Path. Snapover Assembly Permits Using Of A One --- Piece Circ...
All supplier products

Same products

Mobile Crushing Plant
Mobile Crushing Plant Seller: The Nile Machinery Co., Ltd. Mobile crushing plant also named portable crusher station, is a new type of crushing equipment, r...
Impact Crawler Mobile Crushing Station
Impact Crawler Mobile Crushing Station Seller: The Nile Machinery Co., Ltd. Impact crawler mobile crushing station is a complete mobile crushing and screening plant which co...
VSI Sand Making Machine
VSI Sand Making Machine Seller: The Nile Machinery Co., Ltd. VSI sand maker machine is widely used for fine crusher and coarse grinding of metal and non metal...
Gold CIL Plant
Gold CIL Plant Seller: The Nile Machinery Co., Ltd. The gold CIL plant is a common advanced process in mineral processing. In addition, it realizes t...
Rod Mill
Rod Mill Seller: The Nile Machinery Co., Ltd. Rod mill is a grinding machine with steel rod as grinding medium, it's widely used grinding mill ...