Air Suspension Centrifugal Blower ZENGKUN
ZCJSD Product Description
The Turbo Blower Is Composed Of An Air Bearing, A Base, A Permanent Magnet Synchronous Motor, A Variable Frequency Controller, And A Self-Cooling System, And Is Equipped With An Air Filtering Device And An Exhaust Valve Muffler. Due To The Air Suspension Bearing Technology, The Fan Bearing Has Large Frictional Vibration, Low Heat Dissipation Capability And Noise Of Less Than 80 Decibels. Therefore, There Is No Need To Install Lubricating Oil Devices And Gas, Oil And Water In The Piping System, And There Is No Need To Set Up Special Audio Equipment.
Air Bearing
- No Oil Required
- No Vibration
- Low Noise (75db-80db)
- No Maintenance Required (Just Change The Filter)
High Efficiency Inverter And (BLDC) Permanent Magnet Brushless DC Motor.
- The Electricity Bill Is Reduced By 30-50% Compared To The Roots Blower.
- The Electricity Bill Is Reduced By 20% Compared To The Original Centrifugal Fan.
- Semi-Permanent Life
High Efficiency Stainless Steel 630 Impeller Is Used.
-The Impeller Life Can Be Maintained For 30 Years
- Impeller Efficiency Up To 92%
Product Features
1. Energy Efficient.
High-Efficiency Impellers And Ultra-High-Speed Motors Use Direct Connections From Air Bearings To Remove The Gearbox And Lubrication System Without Mechanical Contact, Vibration, Low Noise, And No Sound Insulation.
The Brushless DC Motor And The Variable Frequency Speed Control System Are Adopted To Adjust The Speed Regulation Flow And Pressure, And Maintain High Efficiency Within The Working Flow Range Of The Fan.
2. Save Space And Reduce Investment In Supporting Facilities.
The Smallest Fan Room Area, Light Weight, Simple Structure, No Installation And Hoisting Device. At The Same Time, Convenient Layout Can Be Selected According To Needs, Such As Blowing The Fan Room Directly On The Aeration Tank, Saving Pipeline Investment And Reducing Pipeline Resistance Loss.
Three. The Operation Is Simple And The Degree Of Automation Is High.
The Fan Itself Performs Self-Test On The Speed, Pressure, Temperature And Flow To Prevent Surge And Achieve Unmanned Operation. In The Fan Working Area, The Air Volume And Wind Pressure Output Can Be Adjusted Freely According To The External Control Signal.
There Is No Need For Local Control Cabinet And Soft Start Cabinet. The Fan Itself Integrates The Local Control System. The Main Control Panel Set In The Fan Room Can Automatically Adjust The Pressure, Flow, Control Opening And Fault Alarm Through The Computer CP U To Realize Single And Multiple Simultaneous Automation. . C Control Operation. It Can Also Be Controlled By A Remote Central Control Room.
Through Simple Training, The Relevant Technicians Can Automatically Put Into Operation And Operate Unmanned According To The Procedures Of The Operation Manual.
4. Equipment Reliability Is High.
Ultra-High Speed (BLDC) Motor And HAFB (Hydraulic Dynamic Foil Bearing) Dynamic Air Bearing Technology (Gearbox Removal, Oil Lubrication System, Complex Control System Failure), High-Quality Materials For Key Parts (Impact SUS630 High-Strength Stain) Reduce The Use Of Steel And Axial Titanium Materials); Through Standardized Production, To Ensure Stable, High Performance And High Reliability.
Other supplier products
|
|
turbo blower |
Air Suspension Centrifugal Blower Is A New Type Of Environmental Protection Blower With High Performance. The Blower Can Adjust The Motor Power Acc... |
|
|
SX Series Cross Roller Bearing |
(Integral Inner Ring, Split Outer Ring, Ultra-Thin)
SX Series Cross Roller Bearing Have Smaller Cross-Section Size Than RB Series Under The Same... |
|
|
Semiconductor Thin Section Ball Bearing |
Zengkun Has The Engineering Expertise To Develop Precision Thin Section Ball Bearing Solutions For Each Step In The Silicon Chip Manufacturing Proc... |
|
|
Beer Aluminum Foil |
Technical Parameters Of Aluminium Foil For Beer Sealing:
Alloy State, Thickness, Width, Elongation (%) Tensile Strength, Thickness Tolerance
... |
|
|
Air Suspension Centrifugal Blower ZENGKUN |
ZCJSD Product Description
The Turbo Blower Is Composed Of An Air Bearing, A Base, A Permanent Magnet Synchronous Motor, A Variable Frequency Con... |
供应产品
Same products
