FDT-0231 lab equipment Automatic Closed cup flash point tester of petroleum products
The instrument is designed and made as per the National Standard GB/T261 ASTM D93 ISO 2719 Test Methods for Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Methods), It is used to deter mine flash point of petroleum products and bituminous materials, excepting fuel oil and materials having a flashpoint of lower than 79 °C.
Features
1, with the operating software prompts;
2, with the experimental date, test time parameter prompts;
3, automatic correction of atmospheric pressure and calculated correction values;
4 differential detection, automatic correction system deviation;
5, opening the lid, ignition, detection, print test data computer is done automatically;
6, electronic ignition, the gas flame, forced air cooling.
7, the innovative use of the furnace automatically tilt system, the experiment after the furnace cooling rate faster, greatly shortened several times the time interval between experiments
Specifications
1 Power supply: AC 220V ± 10%, 50Hz
2, range: room temperature ~ 300 ° C;
3, Repeatability: ≤ 2 ℃
Reproducibility: ≤ 4 ° C The visibility: 0.1 ℃
5, Accuracy: 0.5 ℃
6, heating rate: GB/T261-Standard
7 Ignition way: electronic ignition gas flame
8, to adapt to the environment temperature :10-40 ℃
9, adapt to the environment humidity: <85%
10 Total power consumption: not more than 300W
Send product request
Other supplier products
 |
Automatic trace moisture analyzer FDT-1371 | Automatic trace moisture analyzer FDT-1371 Application range The automatic trace moisture analyzer is the design and manufacture of the requireme... |
 |
Automatic lubricant oxidation Stability Tester (rotation the oxygen bomb Law) FDH-0171 | Purpose: The instrument is designed and made as per the Industry Standard SH/T0193-92 Test Methods for Oxidation Stability of Lubricating Oils (Gyr... |
 |
"Iubricating grease and malthenes needle penetration tester FDH-4501 | Iubricating grease and malthenes needle penetration tester FDH-4501 Applied standards: GB/T269-91、ISO2137-85、ASTMD217-82、IP50-79 Application range... |
 |
FDH-0201 Petroleum Oils and Synthetic Fluids Demulsibility Characteristics Tester | Scope Applicable standards: GB/T8022 ASTM D2711 "Test Methods for Demulsibility Characteristics of Petroleum Oils and Synthetic Fluids”. It i... |
 |
Petroleum products - Determination of ash analyzer FDR-2101 | Application range Ash analyzer of petroleum products to the requirements specified in the design and manufacture in accordance with the national st... |
Same products
 |
KLUBER MICROLUBE GL 261 1KG for SMT Production Line | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | N990pana-023 Panasonic MP Grease Kluber Isoflex Nbu 15 Grease Afc Lubricant K3036c K48-M3856-0... |
 |
LUBE MY2-4 400G for HAITIAN Injection Molding Machine | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Some lube grease for your reference“LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 ... |
 |
LUBE LHL-300-7 700G for Injection Molding Machine | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | LUBE MP-1-4 400G LUBE MP-1-7 700G LUBE LHL-W100 700G LUBE LHL X100-2 200G LUBE LHL X100-4 400... |
 |
LUBE FS2-7 Lot. 5C Lubricants for Injection Molding Machine | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Some lube grease for your reference LUBE MP-1-4 400G LUBE MP-1-7 700G LUBE LHL-W100 700G LUBE... |
 |
62NS-1-7 700G LUBE Grease for Injection Molding Machine | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Japan LUBE 62NS-1-7 Grenn Packaging Grease from Yangling Place of Origin: China( Mainland ) ... |
