Thin Film Solar Modules

Product Name： Thin Film Solar Modules

General instructions before installing the PV modules:
• Wear protection gloves, shoes and goggles for all kind of work you perform when handing glass
• Box cannot be placed in slope greater than 5° the ground when unpacking and the long side on
of box parallel to the ramp.
People can not stand on logo printed side of box when unpacking.
• After unpacking, module must be unload within 1H.
• Only install modules which are not damaged.
• Ensure that the junction box, cable and connectors are undamaged prior to installation.
• Observe the grounding requirements depending on the installation location.
• Integrate the solar system in the existing lightning protection system in accordance with the
local regulations.
• Do not install modules or perform maintenance of modules in strong wind or rain. It is
recommended that mounting and installation only be performed in dry weather.
• During mounting on buildings, there is a danger that tools, mounting materials or solar modules
can fall and injure people. Block off the danger area on the ground before beginning the
assembly work.
• Warn people near the danger area or in the building. Keep children away from the installation
site.
• Carry out wiring work in such a way that people are not endangered and that no damage can
occur.
• Protect all parts of the module during transport and installation from mechanical stress (e.g.
from pressure, tension, torsional stress). Ensure that the bend radius of the connection cables is
greater than 60 mm at all times.

Macsun Solar supplys Solar Cell, Solar Panel, Solar Power Station, Solar Power System, Solar Lamp, Solar Street Light, Solar Traffic Light, Solar Garden Light, Solar Charger, and other Solar product. We install the solar power system, solar power plant, solar farm, and other solar projects.