Walk-in High-Temperature Aging Chamber

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Applications

The High-Temperature Aging Chamber is a critical testing apparatus designed to simulate high-temperature and harsh environmental conditions for high-performance electronic products such as complete computers, monitors, terminals, servers, cameras, automotive electronics, PCBs, power supplies, motherboards, monitors, electrical appliances, and switch-mode chargers. It serves as an essential experimental device for enhancing product stability and reliability, and is a vital production process for improving product quality and competitiveness.

Standards

GB50052-95 Code for Design of Power Supply and Distribution

GB50054-95 Code for Design of Low-Voltage Distribution

GB50169-92 Code for Construction and Acceptance of Grounding Installations in Electrical Installation Engineering

Features

1. Control system integration with aging function design. The control cabinet features functional design, enabling operation of aging duration, temperature, and various switches from a single unit. The cabinet panel boasts an aesthetically pleasing design and intuitive operation.

2. Fully automated aging process with partial anomaly self-handling capabilities, streamlining operations for simplicity and automation.

3. Multiple safety protections ensure reliable operation.

4. Electric heating prevents dry burning. Automatic power shutdown occurs during fan failure or excessive duct temperatures, accompanied by audible alarms.

5. Interlocked heating and fan operation: Heaters cannot activate independently if fans fail to start.

6. High-temperature resistant wiring (non-combustible at 300°C) connects all heating elements.

7. Equipped with a 40W high-temperature-resistant explosion-proof indoor light fixture, extending bulb lifespan and preventing bulb explosions.

8. Chamber body constructed with flame-retardant insulation material, offering excellent thermal performance and high safety margins.

9. Over-temperature audible/visual alarm function: During aging processes, the chamber automatically cuts power and triggers an alarm upon detecting over-temperature or overload conditions.

Parameters

Item	Specifications
Dimensions	Room size specified by the customer according to on-site conditions
Insulation Material	Rock wool or polyurethane (choose one); thickness: 5.0 cm, 7.5 cm, 10 cm, or customer-specified
Temperature Range	RT ~ +45°C / ~70°C / ~+85°C
Temperature Fluctuation	±1°C
Temperature Deviation	±2°C / ±3°C / ±5°C, etc. (measured under no-load conditions)
Operation Mode	Temperature adjustable, constant temperature and fixed value operation (PLC program control or fixed value control)
Heating Power	Determined by the size of the aging chamber
Installation Power	380V, 50 Hz; if using 220V power, a minimum current supply of 120A is required

Test Procedures

1. Pre-Operation Preparation

Inspect chamber exterior for deformation, scratches, and aging of sealing strips.

Verify main power supply (380V standard) and control box power compatibility.

Check grounding resistance (<4Ω) using a multimeter.

Ensure temperature sensors are calibrated and clean (recommended annual calibration).

Confirm surrounding environment: ≥50 cm clearance, avoid direct sunlight or heat/cold sources; ambient 5–40℃, humidity ≤85% RH.

2. Startup Sequence

Turn on main chamber power, then the control box main switch. System performs self-check (~30s).

Observe display; ensure “Self-check complete” is indicated.

3. Preheating or Cooling

For rapid cooling, engage the “pre-cool” mode to reach target temperature minus 10℃.

For high-temperature tests, initiate “heating preheat” process with circulation fans to accelerate temperature stabilization.

4. Sample Placement

Place samples evenly, avoid overcrowding, ensure airflow circulation.

Verify total weight and volume do not exceed chamber limits.

5. Operation Monitoring

Continuously monitor internal temperature and fan operation.

Observe for abnormal alarms; take corrective action if necessary.

Restrict access to authorized personnel only.

Other supplier products

	Thermal cycle wet freezing testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com The Thermal Cycle Wet Freezing Testing Machine is designed for comprehensive environmental ...
	Engine Cooling System Pressure Pulsation Tester for EV & ICE Vehicles | Factory Direct China	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Parameters Parameter CategoryDetails Equipment Dimensions 4350 m...
	ASTM ISO High-Load Tribology Tester Factory Supplier	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com High-Pressure Friction and Wear Tester is a temperature-controlled tribologic...
	ISO 11155 Filter Test System	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The system complies with: (1) ISO 11155-1 – Test method for particulate f...
	Veslic Rub Fastness Tester	Whats/App: +86 156 1874 6768 Web: standard-groups.com Application It simulates real-world wear scenarios, such as foot rubbing, cross-legged sea...

All supplier products

Same products

	Two-Shot Injection Molds	Seller: WIT MOLD LIMITED	Two-Shot Injection Molds Advantages of two-shot injection molding The benefits of Double Inject...
	precision injection molding	Seller: WIT MOLD LIMITED	precision injection molding Precision injection moldingis a method demanding unparalleled accura...
	Custom Plastic Molds molding	Seller: WIT MOLD LIMITED	Custom Plastic Molds molding Plastic Molds molding servicesprovide many extremely versatile part...
	Thermoset Molding	Seller: WIT MOLD LIMITED	Thermoset Molding Key Aspects of Thermoset Molding Materials: Thermosetting Polymers:These inc...
	PE Film Scrap, Rolls, Bale, Regrinds, Lump, LLDPE, HDPE, LDPE	Seller: Plastic scrap, ferrous and non-ferrous metal scraps supplier for recycling	We have PE film scrap, including LLDPE, HDPE, and LDPE, available for ongoing shipment to buyers ...