PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA66 GF 15Heat Stabilized (A2006C, A2016C) for Engineering Plastics
PA 66 GF 15is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.
AnmeiPA66 GF15 Storage and Handling
PRE-PROCESSING：
Pre-drying: 4-6h / 130°C
Processing:
Melting temperature 280 - 300 °C
Mold temperature 60 - 100 °C
Product storage and handling:
PA is a highly hygroscopic material. When the dryPA materialis exposed to the atmosphere, it will absorb moisture quickly, so it is recommended to keep it sealed. In order to ensure the best performance index after extrusion, the material must be dried before processing, and the moisture content of the particles should not exceed 0.02%. It is recommended that the material be dried at 110-130°C for 4~6h.
PA GF15Heat Stabilized (A2006C) Typical Application
PA66 15% glass fiber and heat stabilized modified grades are applied to the sectors of circuit breaker, electrical box shell, water pump housing and cover, offering high rigidity and resistance to thermal deformation.
Send product request
Other supplier products
 |
PA66 GF15 With High Tensile Strength (A2307C, A2317C) for Engineering Plastics | PA66GF15is a 15% glass fiber reinforced, toughened, polyamide 66 resin for injection molding. Typical Application of PA66 GF15With High Tensile St... |
 |
PA66 GF50(A2011J) | PA 66 GF 50is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various process... |
 |
Anmei-ABS Engineering Plastic | ABS resin is a terpolymer composed of acrylonitrile, butadiene and styrene. ABS has the rigidity, chemical resistance and heat resistance of polyac... |
 |
PA66 GF50(A2011J) for Engineering Plastics | PA66GF50is a fiber-reinforced plastic made of Nylon 66 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing... |
 |
PA6 GF20 Heat Stabilized (A1006D, A1016D) for Engineering Plastics | PA6 GF 20has 20% glass fiber filler. It has much greater heat-resistant mechanical properties than unfilled polyamide. Anmeiplastics has always bee... |
Same products
 |
PET bottle bale for sale, Plastic PET bale scrap, Plastic Bottle Scrap Supplier | Seller: Low-Density Polyethylene Film Scrap (LDPE) Bale, Rolls, Lumps, Regrinds-LLDPE-HDPE, PE Film | As a leading plastic recycling firm, we are pleased to introduce our new line of PET bottle trash... |
|
|
PA66 GF15 Heat Stabilized (A2006C, A2016C) for Engineering Plastics | Seller: Suzhou Anmei Material Technology Co., Ltd | PA66 GF 15Heat Stabilized (A2006C, A2016C) for Engineering Plastics PA 66 GF 15is a 15% glass fi... |
 |
EPS Block Scrap | Seller: Walker De-Scrap Inc | Are you looking for EPS Block Scrap or any other type of scraps and then you are welcome to our c... |
 |
aluminum wheels Scrap | Seller: Willies De Scrap Inc | Are you looking for aluminum wheels or any other type of scraps and then you are welcome to our c... |
 |
Home and Office use Small Trash HDPE Garbage Bag | Seller: Jinan Fengyi Commodity Co., Ltd | Home and Office use Small Trash is the most common use in our daily life, thinnest bag for light... |
