Anti slip coefficient tester machine

Whats/App: +86 156 1874 6768

Web: standard-groups.com

Standards

(1)ASTM F2913 — Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester

(2)BS EN 13287 — Personal Protective Equipment. Footwear. Test Method for Slip Resistance

(3)GB/T 28287 — Foot Protection — Test Method for Footwear Slip Resistance

(4)EN ISO 20344 — Personal Protective Equipment — Test Methods for Footwear

(5)SATRA TM144A — New Method of Non-slip Test for Footwear

(6)CEN/TC 161 WG3 — European Committee for Standardization Working Group on Slip Resistance

Product Features

(1)Fasten device enables quick and secure sample installation, minimizing test variability.

(2)Real-time load acquisition system ensures accurate force measurement during testing.

(3)Support component and regulator indicator display test status dynamically.

(4)Pneumatic lifting control accommodates different specimen thicknesses.

(5)Irregular surface support tools provide uniform load and pilot force for non-flat surfaces.

(6)Adjustable test inclination to simulate various floor angles and slip conditions.

(7)Dial-type adjustment allows precise observation and modification of tilt angle during testing.

(8)Real-time analysis software visually displays maximum, minimum, and average friction.

(9)Automatic calculation of friction coefficient for accurate evaluation.

(10)Multi-path data output and high compatibility with Windows-based systems.

Technical Parameters

Item	Parameters
Angle of Inclination	-40° to 40° (adjustable)
Load	Up to 600 N
Torque Speed	Up to 50 N within 0.2 s
Testing Speed	0.3 m/s (other speeds configurable)
Time Accuracy	0.1 s
Time Display Accuracy	0.01 s
Measurement Parameters	Maximum friction, minimum friction, average friction, coefficient of friction
Power Supply	AC 220V, 50Hz
Dimensions	1200 × 700 × 1050 mm (W × L × H)
Weight	75 kg

Accessories

(1)Clamping and sample mounting fixtures

(2)Support tools for irregular surfaces

(3)Tilt angle adjustment dial

Test Procedures

(1)Install the footwear or floor specimen on the test fixture using the fasten device.

(2)Adjust the tilt angle according to the test requirement.

(3)Set the load and testing speed parameters.

(4)Initiate the test; the rotating or tilting mechanism applies horizontal force to the sample.

(5)Monitor real-time friction values displayed by the analysis software.

(6)Record maximum, minimum, and average friction, along with the calculated coefficient of friction.

(7)Repeat for additional samples or floor/sole combinations as needed.

Maintenance Information

(1)Clean test surfaces and fixtures regularly to prevent contamination affecting friction results.

(2)Inspect pneumatic and load systems periodically for leaks or wear.

(3)Check and calibrate the tilt mechanism and load sensors to maintain accuracy.

(4)Update software and backup test data frequently.

(5)Store the tester in a dry and stable environment to prevent corrosion and mechanical degradation.

Other supplier products

	Photovoltaic module backplane peeling strength testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction The Photovoltaic Module Backplane Peeling Strength Testing Machine is a speci...
	ISO Custom Suture Needle Cutting Force Tester	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com The Suture Needle Cutting Force Tester is a precision instrument specifically...
	Car Seat Center of Gravity Measuring Tester Manufacturer	Get a quote： Whats/App: +86 156 1874 6768 Web: standard-groups.com Features (1) High-precision measurement system for accurate determination of...
	Programmable three-station seat strength testing machine	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standards The machine supports compliance with major international and national standards:...
	Toyota abrasion tester for plastics and coatings	Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard JIS L 0849 (Japanese Industrial Standard for Abrasion Resistance of Textiles) IS...

All supplier products

Same products

	eva boots manufacture	Seller: Shijiazhuang Runlei Labour Protection Supplies Co., Ltd.	eva boots manufacture (Ethylene Vinyl Acetate) is a closed-cell foam copolymer produced by c...
	eva snow boots manufacturer	Seller: Shijiazhuang Runlei Labour Protection Supplies Co., Ltd.	eva snow boots manufacturer EVA Snow Boots for Ski Resorts & Winter Outdoor Activities ...
	Rubber Anti Slip Outsole Food Work Boots	Seller: Shijiazhuang Runlei Labour Protection Supplies Co., Ltd.	Rubber Anti Slip Outsole Food Work Boots Rubber Anti Slip Outsole Food Work Boots The (Mo...
	Antibacterial Food Processing Boots	Seller: Shijiazhuang Runlei Labour Protection Supplies Co., Ltd.	Antibacterial Food Processing Boots Antibacterial & Shrink-Resistant Food Processing Boo...
	light anti slip warm eva boots for fishing	Seller: Shijiazhuang Runlei Labour Protection Supplies Co., Ltd.	light anti slip warm eva boots for fishing Light Anti-slip Warm EVA Boots for Fishing The...