GTM-C Model Carbon Dioxide Filler

GTM-C Carbon dioxide filler is a new product developed by our scientific researcher after absorbing the advantages and excellency of CO2 filler at home and abroad,considering the characteristic CO2 inside canister is a mixture of gas and liquid.It is quickly and efficient in fiiling because it is the liquid transforming in the obturation between the pipe and container.It features compact structure, running steady, saving energy, filling nicety and with abroad usage.So it is an ideal equipment in the manufacturer and the maintainer of CO2. II.Main Technical Parameters 1.The technical parameters of the filling equipment A.This machine need not be heated or cooled,and CO2 can be directly filled into the fire extinguisher form the large steel cylinder B.The original pressure in the CO2 steel can is 3～5Mpa and the filling pressure is 6～10Mpa. C.The filling speed: 1～4Kg/min. D.Voltage: 380V&220V; E. Power: 1.5KW.2.The different table of the filling time and the filling amount of the machine. Specification Parameters Items MT2 MT3 MT5 MT7 Weight of extinguisher (kg) 0 2 -0.15 0 3 -0.15 0 5 -0.2 0 7 -0.2 Filling time(s) ≤50 ≤60 ≤60 ≤90

Other supplier products

	high pressure pipe locking machine in model DSG-102	The machine is an enhanced type of a high pressure locking tube machine in model 102, which is the special equipment for pressing the tube end of a...
	3D-SY750 series motor-driven pressure test pumps	3D-SY750 series motor-driven pressure test pumps researched and produced by our factory are the generation-substituting products of motor-driven pr...
	GFM16-1B General Model Dry Powder Filler	Model GFM-1B dry powder filler is a new product developed by our factory after absorbing the advantages of powder fillers at home and abroad. It ca...
	GTM-D carbon dioxide fire extinguisher filling machine	The model GTM-D carbon dioxide fire extinguisher filling machine is a special-purpose equipment for filling the carbon dioxide fire extinguishing a...
	Model WDG1.7 nitrogen filler	Model WDG1.7 nitrogen filler (referred to as filler hereinafter) can be used for filling nitrogen to cylinders to be pressurized by nitrogen in the...

All supplier products

Same products

	Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induced draft fan	Seller: Popula Group Company Limited	Puduct Name: Y9-35-13.5D-75KW with volume 2834-2893 pressure POPULA boiler centrifugal induce...
	Ultrasonic Computerized Tape Cutting Machine (Right Angle) JM-2100	Seller: Zhejiang Huaqi Information Technology Co., LTD	Fully automatic cutting, easy operation. Wide application range, high cutting quality, smooth cut...
	24 Cavity Cap Compression Machine	Seller: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	24 Cavity Cap Compression Machine	Seller: Zhejiang Huaqi Information Technology Co., LTD	The 24 Cavity Cap Compression Machine is an advanced piece of equipment designed to meet the dema...
	SWT-UME Hot Air Welder Pvc Tarpaulin	Seller: HEBEI MINGMAI TECHNOLOGY CO.,LTD	SWT-UME Banner Hot Air WelderVoltage: 220V/110VPower: 3000W/2200WFrequency: 50/60HzTemperature: 2...