S-Sy series manual single casing test pressure pump
Model S-Sy series manual single casing test pressure pump (hereinafter referred to as the pump) is the equipment which obtains liquid high pressure source in the test for various kinds of pressure vessels, pipings, valves, steam boilers etc specially. The working media are 5oC～60oC clean water, emulsion as well as the oils with kinematic viscosity being not greater than 45 mm2/s. This series pump has 6 models.
II. Technical Parameters
Model Rated work pressure MPa/cm2 Flow rate per time mL/time Plunger diameter
mm Plunger travel
mm Handle maximum exerted force ≦N Overall dimensions L×W×H
mm Weight
≦Kg
S-SY/6.3 6.3 22 32 30
360
753×200×880 20
S-SY/16 16 16 22
S-SY/25 25 6.3 18
S-SY/40 40 4.0 14
S-SY/63 63 2.8 12
S-SY/80 80 1.8 10
Other supplier products
|
|
GFM16-1B General Model Dry Powder Filler |
Model GFM-1B dry powder filler is a new product developed by our factory after absorbing the advantages of powder fillers at home and abroad. It ca... |
|
|
Model WDG1.7 nitrogen filler |
Model WDG1.7 nitrogen filler (referred to as filler hereinafter) can be used for filling nitrogen to cylinders to be pressurized by nitrogen in the... |
|
|
DSG-250C Locking Pipe Machine |
DSG-250C Model pipe locking machine produced by our factory is applicable for the fastening and pressing processing of the high pressure rubber hos... |
|
|
S-Sy series manual single casing test pressure pump |
Model S-Sy series manual single casing test pressure pump (hereinafter referred to as the pump) is the equipment which obtains liquid high pressure... |
|
|
DX68-B pipe locking machine |
Model DX68-B pipe locking machine is mainly used for buckling processing for high pressure rubber pipe assembly in the mechanical engineering. It c... |
All supplier products
Same products
