BN/BT/BH 2-Jaw / 3-Jaw / 4-Jaw Standard Lathe High Speed Hollow Hydraulic Power Chuck
(1). BN / BT / BH hollow hydraulic chuck with 4 inch, 5 inch, 6 inch, 8 inch, 10 inch, 12 inch, 15 inch, 18 inch, 21 inch, 24 inch size and divided into 2- jaw type, 3-jaw type, 4-jaw type.
(2). Clamping force is large, long stroke achieve large clamping range. Suitable for processing rod-type workpiece, more economical.
(3). When loading different workpieces, only need to change the clamps to use.
(4). Repeat positioning accuracy : 0.02mm.
(5).Material: Steel.
Other supplier products
|
BL/BLT 2-Jaw / 3-Jaw Long Stroke Hollow Hydraulic Power Chuck |
(1). BL / BLT hollow hydraulic chuck with 6 inch, 8 inch, 10 inch, 12 inch size and divided into 2- jaw type, 3-jaw type, . (2). Clamping force is ... |
|
PUE 3-Jaw Slant-Column Pull Back Draw Down Power Chuck for I.D. |
(1). PUE I.D. slant-column pull back chuck is suitable for machining the workpiece with the requirement of positioning, verticality, concentricity ... |
|
NHRR 45 degrees/90 degrees Quartered Center-Clamped Hydraulic Indexing Power Chuck |
(1). NHRR chuck is based on the NHR chuck, redesign and improvement; (2). NHRR chuck is designed to solve (precision castings, fittings, etc.) due ... |
|
BU/BUT 2-Jaw / 3-Jaw Pull Back Draw Down Power Chuck for O.D.verticality and Parallelism |
(1). BU / BUT chuck apply for machining verticality and parallelism have the required workpieces, such chuck a wide range of clampings. (2). When l... |
|
NHRD 45 degrees/90 degrees Automatic Quartered Centering Hydraulic Indexing Power Chuck |
(1). NHRD chuck NHR chuck based on the expansion of the center positioning workers to ensure that the workpiece when drilling position accuracy. (2... |
All supplier products
Same products