Cone calorimetric test equipment
ASTM E 1354Method of test for heat and smoke release rates for materials and products using an Oxygen Consumption Calorimeter
BS 476 Pt.15Fire tests on building materials and structures-Part 15: Methods for measuring the rate of heat release of products.
GB/T 16172-2007Method of test for heat release rate of building materials.
NFPA 264Standard method of test for heat and visible smoke release rates for materials and products using an oxygen consumption calorimeter
1、 10kV spark lighter with safe fire-off device. The lighter automatically detect its position via the lever which connects to the closing mechanism.
2、System automatic ignition, automatic timing, automatic gas closing and fire-off.
B、Exhaust system
1、Made up of axial flow fan, stainless steel exhaust pipe, diffusion plate, smoke collecting cover, exhaust pipe, orifice plate flow meter and thermometer.
2、 Stainless steel, long service life, including the cover, gas sampling needle, exhaust fan.
C、Gas sampling system
1、Including the ring sampler, getter pump, particle filter, cold trap, exhaust valve, water filter and filter of CO2.
2、Three-stage filtration at an precision of 0.5um.
3、Freezing cold trap, air-conditioning refrigeration system, control the temperature of 0 ~ 5 ℃
4、Sampler has 12 pores opposite to the direction of air flow. Built-in dust filter is 685mm away from the smoke collecting cover.
D、Measuring system
1、Paramagnetic oxygen analyzer, range 0-25%; British imported SERVOMEX oxygen sensor, linear response.
2、 Smoke density is measured with a laser system.
3、High precision load sensor measures the weight change of sample material during testing process.
4、Temperature control system: PID temperature control, three thermocouples measure radiation cone temperature.
E、User operating system
1、Laboratory used professional Labwiew control system, user friendly, easy to operate, precise control.
2、PID temperature control module is linked with power adjusting module. Programmable controller adjust the thermostat control.
3、Signal acquisition and processing module is linked with the air flow circuit control module through the programmable logic controller to calculate the output, intelligent adjustment of the preset wind speed. The system provides the query function. The system will automatically make sample serial number and store the serial number and temperature curve in the database within the system, and can be inquired by entering the sample number, test date, etc.
The test theory of the cone calorimeter is based on the fact that the amount of pure combustion calories are proportional to the amount of oxygen burned. Combustion of each 1kg of oxygen will produce 13.1MJ / kg of gas. Parameters such as the heat emissions, ignition time, oxygen consumption rate, production rate of CO and CO2, gas flow, will be measured.
1. 19" standard cabinet integrated design, nice, easy to operate.
2. cone heater - in the truncated cone, 230V, 5000W, heat output is 0 ~ 120 kW / m2.
3. 19 "touch screen computer to control the entire test process.
4. automatic ignition system, automatic measurement of burning time.
5. 3 K-type thermocouples and PID temperature controller to control the temperature in 3 periods.
6. automatic split gate -protect the sample area before the test to ensure the initial quality measurement is stable. The operator can have extra time to run system testing before the start of the test. For flammable samples, if there is no opening and closing mechanism, it is easy to burn at earlier time. This extra time is very important to the operator.
7. sample holder - sample size 100mm x 100mm, thickness of no more than 50mm.
Send product request
Other supplier products
 |
rca tape friction testing machine | Tape abrasion test machine make wear test of various surface coating consumption test with mobile , PDA, MP3, CD and laptop, the load 275g, 175g.55... |
 |
Filter Media Tester APM 2005 | Automatic test rig for permeable materials for measurement of particle penetration .With this test rig concept, the flow over the material under te... |
 |
MARK II Slip Resistance Tester | Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati... |
 |
taber linear abraser | The Taber Linear Abraser incorporates a horizontal arm that reciprocates in a linear motion. Attached to the end of the arm is a precision bearing ... |
 |
Tobacco Air Permeability Tester | Airflow method to measure the permeability of tobacco, cut tobacco, thickness, length, and added, fully able to affect the size of the draw resis... |
Same products
 |
Bakon BK191: The Ultimate Tool for Soldering Iron Temperature Control | Seller: Shenzhen Wikshu Technology Co. | Description Bakon BK191 iron tip thermometer tester (0 - 600°C) For soldering repair, ... |
 |
MaAnt BGA Solder Paste Halogen-free Lead-free Repair Flux | Seller: Phonefix | MaAnt UP-79 MY-224 MY-225 halogen-free solder paste for mobile phone/electronic circuit board CPU... |
 |
3 Inch Ceramic Bond Hybird Transitional Polishing Pads For Concrete | Seller: Xiamen ChinShine Industry and Trade Corporation | – Available Grits: 30, 50, 100, 200,400. – Use wet or dry. Pad Materials –... |
 |
LUOWEI LW-PT03 LW-PT02 Silicone Pad for CPU Chip Tin Planting | Seller: ShenZhen VIP FIXPHONE Technology Co., Ltd, | Description LUOWEI LW-PT03 LW-PT02 CPU Chip Tin Planting Platform with Heat-resistant Si... |
 |
AWithZ UF20B Super Farad Capacitor Spot Welder for Battery Motherboard PCB Welding | Seller: Shenzhen weikexiu technology Co.,Ltd | Description AWithZ New Farah capacitor UF20B spot welding machine Energy gathering weldi... |
