1300HP Trailer -mounted Drilling Rig
1300HP Trailer -mounted Drilling Rig
| Item | Name | Description | Unit | Qty | Total Price | Remark |
| Ⅰ | Main unit | Model:TZJ40/2250 (1300HP) | ||||
| Nominal drilling depth： 4 1/2” DP, 13100ft (4000m) | ||||||
| 5" DP,10500ft (3200m) | ||||||
| Max. hook load: 500000lb(2250KN) | ||||||
| Total power: 2x630HP/2100rpm | ||||||
| Mast height: 125ft(38m) | ||||||
| Traveling system: 6x5 | ||||||
| Raising wireline Dia. : φ32mm(1 1/4") | ||||||
| Hook hoisting speed: 0.2～1.2m/s (6x5) | ||||||
| Substructure height: 19.7ft(6m) | ||||||
| Suitable circumstance humidity :48～88% | ||||||
| Suitable temperature:-20℃～+45℃ | ||||||
| 1 | Diesel engine | CAT EngineC18 Net power: 2x630HP/2100rpm | set | 2 | Import | |
| 2 | Transmission box | Model: AllisionS6610HR Max. input net power: 710HP(530KW) Max. input speed: 2500r/m Max. net input torque: 3078N.M Drive ratio: 0.67:1, 1:1, 1.35:1, 2.01:1, 2.68:1, 4:1, 5.12:1(reverse) |
set | 2 | Import | |
| 3 | Compound Unit | Model:BJX260B Output torque: 26000N.M Max. speed :2500rpm |
set | 1 | ||
| 4 | Drawworks | Single drum drawworks, with seal frame structure. Axial thrust clutch, grooved drum.and crown saver. Model:JC28/11D Rated input speed：450r/min Max. fastline pull：280KN Main drum sizes：φ640x1120mm, grooved Brake type：band brake+hydraulic auxiliary brake Brake rim sizes：φ1270x267mm Crown saver：Crown-O-matic Sandline reel line pull: 110kN Sandline reel sizes: φ340×1045mm Sandline reel capacity:4000m Wire line for sandline reel: φ14.5mm Sandline reel brake rim: φ970×210mm Sandline reel clutch:TPQ124 |
set | 1 | API Spec7K | |
| 5 | Hydraulic auxiliary brake | Model: EATON WCB324 Air control water cooling thrust disc brake Max.Water temperature:82℃ |
set | 1 | Import | |
| 6 | Mast | Structural type: two section, telescoping type, face open, front tilting, hydraulic raising and telescoping. According to API Spec 4F. Including upper mast section, lower mast section, racking board, guylines, raising and telescoping cylinders.Double standpipe ,and equipped with monkey board and casing stabbing board . Model: JJ22538 Max. Hook load: 500000lb (2250KN) Height: 38m Tilting angle: 3° Racking Platform heights: 72.2ft, 75.5ft, 78.7″ Racking Platform capacity:13500ft″(4 1/2” DP,4000m) Windproof capacity: 68mile/h(110km/h) |
set | 1 | API Spec 4F | |
| 7 | Travelling system | According to API Spec 8A, 6x5 | set | 1 | ||
| Wireline Dia.: 1-1/4″ | ||||||
| Max. Hook load: 500000lb | ||||||
| 7.1 | Crown block | Model: TC225, Three-shaft type | set | 1 | API Spec 8A | |
| Max. Hook load: 500000lb | ||||||
| five fastline sheave, Dia. 36″ | ||||||
| one sandline sheave, Dia. 19.7″ | ||||||
| Wireline Dia.: 1-1/4″ | ||||||
| 7.2 | Hook block | Traveling block and hook are integrated into one body. | set | 1 | APISpec 8A | |
| Model: YG225 | ||||||
| OD x No. of sheaves: 36″x5 | ||||||
| 7.3 | Drill line | Dia.: 1-1/4″ | Roll | 1 | APISpec 9A | |
| Long: 3280ft | ||||||
| 8 | Hydraulic Cathead | Model: Y15160 Available stroke length: 1600mm(63'') Max. pull: 33000lb(150KN) Pressure: 2000psi (14Mpa) | set | 2 | ||
| 9 | Substructure | Model: ZZT225 six leg type, foldable, with rotary table base and setback base independent each other,equipped with BOP moving device ,testing stump and drip tray ,rat hole and mouse hole | set | 1 | API Spec 4F | |
| Max. load: 500000lb(2250KN) | ||||||
| Working height: 19.7ft | ||||||
| Structural type: six column swing up, sprial-up hoist | ||||||
| Top surface working area: 24'x 20'(7.2mx 6m) | ||||||
| Clear height for BOP: 15.7ft | ||||||
| 10 | Swivel | Model: XSL225 | set | 1 | API Spec 8A | |
| Max. load: 500000lb(2250KN) | ||||||
| Working pressure: 5000psi(35Mpa) | ||||||
| Washpipe Dia.: 3″(76mm) | ||||||
| Air spinner（LH and RH rotary direction） | ||||||
| Working air pressure 0.8MPa | ||||||
| Rated torque 1600N.m | ||||||
| Rated rotary speed 70rpm | ||||||
| 11 | Rotary table drive | Model: ZX140 with forward and reverse speeds, c/w anti-torque release device Clutch type: ATD318 H Max. input speed: 2100rpm Max. working torque:10864lb.ft Brake moment:2861lb.ft | set | 1 | ||
| 12 | Rotary table | Model: ZP275 | set | 1 | API Spec 7K | |
| Max. Opening size: 699mm(27 1/2”) | ||||||
| Max. Static load:1000000lb(450KN) | ||||||
| Max. working torque:20265lb.ft(27KN.M) | ||||||
| Max. Rotating speed: 300rpm | ||||||
| With anti-slip matting | ||||||
| 13 | Hydraulic winch | Model :YJ3C Max. hoisting load: 6612lb (30KN) Ratedpressure :2000Psi (14Mpa) | set | 1 | ||
| Model :YJ5B Max. hoisting load:11020lb(50KN) Ratedpressure :2000Psi (14Mpa) | set | 1 | ||||
| 14 | Hydraulic system | Max. working pressure: 2000Psi Including two master oil pumps and all kinds of high pressure lines and oil tanks, with key parts imported. | set | 1 | ||
| 15 | Pneumatic system | Max. working pressure:114.3Psi including two air compressors and all kinds of valves and pipelines, with key parts imported |
set | 1 | ||
| 16 | Linghting system | lighting for mast, substructure and trailer etc, 220V, 50HZ | set | 1 | ||
| 18 | Escape sliding device | set | 1 | |||
| 19 | ladders and handrail | set | 1 | |||
| 20 | Mud boat | Foldable type, can be moved by trailer as a whole | set | 1 | ||
| 21 | DP sliding way | set | 1 | |||
| 22 | High position footplate | set | 1 | |||
| 23 | Escaper | TS-00 | set | 1 | ||
| 24 | Climbing assist device | ZP-00 | set | 1 | ||
| 25 | Anti-falling device | TS-40 | set | 1 | ||
| 26 | Safety belt for monkey board | set | 1 | |||
| Ⅱ | Trailer | Model:ES9660 Drive way: 14x8Max. Roading speed(limited): 45km/h Max. climbing gradient: 26% Approch/Departure Angle: 26º/18º Min. ground clearance: 311mmMin. turning radius: 19.5m | set | 1 | ||
| 1 | Trailer frame assy | Model: CJ-01Consisting of beam assy, front fender, mud baffle, raising cylinde base and hydraulic jack cross beam | set | 1 | ||
| 2 | Axles assy | Model: CQ | jts | 5 | ||
| 3 | Tyre | Double tyre, 12-20, with inner tube | ea. | 20 | ||
| 4 | Hydraulic jack | Model: Y3030 Path: 11.8''(300mm) Pressure of system: 2000Psi(14Mpa) |
pcs | 4 | ||
| 5 | Suspending system | set | 1 | |||
| 6 | Transmission shaft | set | 1 | |||
| 7 | Pedal and handrail assy | set | 1 | |||
| 8 | Fuel tank | set | 1 | |||
| 9 | Toolkit | set | 1 | |||
| Ⅲ | Wellhead tools | |||||
| 1 | Elevator link | DH250 | Pair | 1 | ||
| 2 | Elevator | DD2-7/8″,DD3-1/2″,DD5″ | Pair | 3 | One pair for each size | |
| 3 | Weight indicator and deadline anchor | JZG24 | set | 1 | ||
| 4 | Rotary hose | 35Mpa, 3'' | set | 1 | ||
| 5 | Hydraulic tong | ZQ203-100 | set | 1 | ||
| 6 | Hydrauic casing tongs |
TQ340-35 | set | 1 | ||
| 7 | HPU for hydraulic tong | YZM120 | set | 1 | ||
| 8 | Master bushing for RT | set | 1 | |||
| 9 | Casing bushing | 13-3/8'', 9-5/8'', 7'', 5-1/2'' | set | 1 | ||
| 10 | Liner | 1#, 2#, 3# | set | 1 | ||
| 11 | Tools | Used for well-site repair | set | 1 | ||
| Ⅳ | Assembly & test | Max .load test will be performed | set | 1 | ||
| Ⅴ | Paint & packing | Offshore paint for offshore shipment | set | 1 | ||
| Ⅵ | Documents | Chinese and English | set | 3 | ||
| FOB Tianjin seaport | US$1,607,600.00 | |||||
| Note: | ||||||
| 1. Delivery Time:The rig is in stock and will be at Tianjin Seaport in 15 days after receipt of the 40% downpayment. | ||||||
| 2. Payment Terms: the 40% downpayment need be made by T/T within 5 working days after signature of the purchasing contract, and the 60% balance payment should be madeby T/T before shippment after signing the acceptance report in RG. | ||||||
| 3.Trade Terms: FOB Tianjin Seaport | ||||||
| 4. Validity: 10 days dating from the quotation day. | ||||||
| 1st Dec., 2009 |
Send product request
Other supplier products
|
|
1300HP Trailer -mounted Drilling Rig | 1300HP Trailer -mounted Drilling Rig Item Name Description Unit ... |
 |
drill rig, drill bit, pipeline,casing,tubing,oilfield equipment | many kinds of oilfied equipment |
Same products
 |
Mechanic RS5 Multi-function Welding Table Soldering Iron Stand | Seller: PHONEFIX Technology Co., Ltd. | Description Mechanic RS5 multifunctional welding workbench with solder wire storage holder, solde... |
 |
FILTER ELEMENT FBX-630x10 for Pacitcan TPP material | Seller: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | FILTER ELEMENT FBX-630x10 for Pacitcan TPP material The use of advanced technology, absolutely fi... |
 |
Aixun T320 Smart Precision Soldering Station With T245/210 Handle | Seller: SHENZHEN PHONEFIX TECHNOLOGY CO.,LTD (CHINA PHONEFIX) | Description JCID Aixun T320 Smart Integrated Precision Soldering Station With T245 T210 Handle C2... |
 |
Micro Electric Robot DC Brushed Motor | Seller: Zhoushan Yehao Electrical Appliance Co., Ltd | YH-(DC-42) Roller Brush Motor, dia 44mm, height 94mm,16000rpm/min, rated input voltage 6-15V, Rat... |
 |
Gasification combustion flamethrower | Seller: Jinan Baoying Machinery Technology Co., Ltd | 生物质颗粒锅炉的安装成本非常低，并且可以安全加热。而且，设备可以是通用的，散热器和管道可以互换使用，而无需改变原来的加热设备。利用水循环获得加热原料广泛可用且永不枯竭，到处都可以轻松获得（如玉米... |
