Roll Shearing for Chamfering(beveling)Machine
Base in principle of roll shearing,the side and rim angle of plate could be removed during the relative motion that plate is driven forward with the rotation of hob.And the device is capable of satisfying the requirments for bevel prior to welding for Q235 plate,and 16Mn plate and so on.Byusing the device,accurate dimension and fine surface of bevel could be obtained.
Compared with beveling with gas cutting,it has features such as low consumption,high beveling speed(three times higher than gas cutting method) and unnecessary to remove burrs.Compared with other cutting devices such as edge planer,double housing planer and so on,it has features such as much cheaper,smaller floor space required,furthmore the energy cunsumption is only one third of them. Thanks for the unnecessary clampling workpiece when processing,the operation is simple and the efficiency is high,and the bracket configured is not limited to the length and the width of workpiece.Therefore it is a rather suitable option for processing bevel than others and it is the optimal devices in domestic for beveling prior to the welding of plate.
Tensile strength of plate δb(N/mm²) 〈400 〉400~500
Plate Q235 16Mn
Max width of bevel edgeW(mm) 20 16
Feed-in speed V(m/min) ~2.9 ~3.1
Max thickness of plate(mm) 45
Anlge range of bevel α（º） 25~55
Min straight edge e(mm) 2
Outline dimension(L×W×H（mm） 1240×940×1500
Motor：Y112M-4 4KW/1440V/min
Rotating speed of spindle (V/min) 7.7
Hob diameter(mm) φ200
Send product request
Other supplier products
 |
Omnipotent Four Column Hydraulic Press | 1、Nominal force:1600 kN 2、Max stroke:680 mm 3、ownlink speed:when run with nothing:28mm/s When working:13mm/s 4、Go back speed:56mm/s 5、Dimensi... |
 |
CNC Circular Flange Drilling Machine | Ideal machine for round flange processing 1．Single or two axes CNC control 2．CNC、PLC control，CRT display 3．Putting the dimension of workpiece to... |
 |
CNC Hydraulic Punching and Drilling machine | 1、Punching force:1000kN； 2、Marking force：800kN 3、Thickness of workpiece to be punched:3-25mm 4、Thickness of workpiece to be drilled:≤40mm ... |
 |
Angle Straightening and Marking Machine(our national patent product) | 1、Max straightening force:1000kN 2、Max angle to be straightened:200X200X20 mm 3、Straightening capacity:stepless adjustable,easy operation 4、Max ... |
 |
Gnatry Type CNC Drilling Machine | 1．Form of the machine movable gantry thye CNC drillin machine 2．Max dimension of workpiece 3000 mm×3000mm 3．Max thickness of workpiece 200m... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
