Агрегат (машина) для снятия фасок Китай
Base in principle of roll shearing,the side and rim angle of plate could be removed during the relative motion that plate is driven forward with the rotation of hob.And the device is capable of satisfying the requirments for bevel prior to welding for Q235 plate,and 16Mn plate and so on.Byusing the device,accurate dimension and fine surface of bevel could be obtained.
Compared with beveling with gas cutting,it has features such as low consumption,high beveling speed(three times higher than gas cutting method) and unnecessary to remove burrs.Compared with other cutting devices such as edge planer,double housing planer and so on,it has features such as much cheaper,smaller floor space required,furthmore the energy cunsumption is only one third of them. Thanks for the unnecessary clampling workpiece when processing,the operation is simple and the efficiency is high,and the bracket configured is not limited to the length and the width of workpiece.Therefore it is a rather suitable option for processing bevel than others and it is the optimal devices in domestic for beveling prior to the welding of plate.
Tensile strength of plate δb(N/mm²) 〈400 〉400~500
Plate Q235 16Mn
Max width of bevel edgeW(mm) 20 16
Feed-in speed V(m/min) ~2.9 ~3.1
Max thickness of plate(mm) 45
Anlge range of bevel α（º） 25~55
Min straight edge e(mm) 2
Outline dimension(L×W×H（mm） 1240×940×1500
Motor：Y112M-4 4KW/1440V/min
Rotating speed of spindle (V/min) 7.7
Hob diameter(mm) φ200
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
CNC Circular Flange Drilling Machine | Производитель металлорежущих станков Китай. Ideal machine for round flange processing 1．Single or two axes CNC control 2．CNC、PLC control，CRT d... |
 |
Портальная газорезательная машина Китай | Ideal drilling machine for plate 1．Two or three axes,can drill through hole or bild hole 2．CNC、PLC control，CRTdisplay 3．Putting the dimension of... |
|
|
Агрегат (машина) для снятия фасок Китай | Base in principle of roll shearing,the side and rim angle of plate could be removed during the relative motion that plate is driven forward with th... |
 |
Портально-сверлильные станки Китай | 1．Form of the machine movable gantry thye CNC drillin machine 2．Max dimension of workpiece 3000 mm×3000mm 3．Max thickness of workpiece 200m... |
 |
Фрезерно-сверлильно-расточной станок Китай | 1、Punching force:1000kN； 2、Marking force：800kN 3、Thickness of workpiece to be punched:3-25mm 4、Thickness of workpiece to be drilled:≤40mm ... |
