Limiting Oxygen Index Tester
Introduction
To automatically determine the minimum quantity of oxygen required for combustion. The apparatus determines the flammability characteristics of the materials used in the production of electric cables. The oxygen percentage is detected by a paramagnetic transducer (O2 accuracy <0.1%), and the combustion occurs inside the glass column. The operator is fixing only the O2ratio, while the N2flux is kept constant by proportional valve of the electronic system. Two units separated, one to check the measurements and one to feed oxygen and nitrogen to the column where the testing sample is placed.
Technical Parameter:Main unit:360 x 300 x 240 h (mm)
Colum unit:200 x 300 x 50 h (mm)
Colum:Type A ,Ø100 x 450 h (mm)
Overall dimension:360 x 300 x 740 h (mm)
Net weight:13 kg
Gross weight:19kg
Power supply:230 V 50Hz,single phase
Gas:oxygen, nitrogen, propane, dry industrial air 2 bar
ASTM D 2863Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
ISO 4589-2Plastics-Determination of burning behaviour by oxygen index –Part 2: Ambient-temperature test
CEI 20-22/4Tests on electric cables under fire conditions-Part 3: Tests on bunched wires or cables
ISO 4589-2Plastics-Determination of burning behaviour by oxygen index –Part 2: Ambient-temperature test
CEI 20-22/4Tests on electric cables under fire conditions-Part 3: Tests on bunched wires or cables
Configuration include:
· Support for self supporting specimens
· Support for non-self supporting specimens
· Support for thin specimens
· Column Pyrex glass with cap
· Burner for the ignition of the sample with manual regulator and gas hose
· Clamp for specimen positioning
· Support for self supporting specimens
· Support for non-self supporting specimens
· Support for thin specimens
· Column Pyrex glass with cap
· Burner for the ignition of the sample with manual regulator and gas hose
· Clamp for specimen positioning
· Determination of the percentage of oxygen through a paramagnetic transducer (accuracy O2<0.1% )
· Direct reading on color display 3.2" (% Oxygen, Flow, Air)
· Automatic flow through Mass flow
· Automatic mixing oxygen / nitrogen
· Management of equipment Microprocessor
· Management mixture by addition of air to more economic measures with high concentration oxygen
· Automatic calibration (0 and 100%)
· Distributor flow inside the column
· USB output to connecting PC
· Direct reading on color display 3.2" (% Oxygen, Flow, Air)
· Automatic flow through Mass flow
· Automatic mixing oxygen / nitrogen
· Management of equipment Microprocessor
· Management mixture by addition of air to more economic measures with high concentration oxygen
· Automatic calibration (0 and 100%)
· Distributor flow inside the column
· USB output to connecting PC
Optional:Software testing report data, easy to use, customize your testing procedures and final report.
Send product request
Other supplier products
Mask Air Tightness Tester | Applications: The Mask Air Tightness Tester is a portable device designed to detect the service performance and applicability of protective mask... | |
Oscillatory And Wyzenbeek Abrasion Tester | Wyzenbeek Abrasion Tester, made of modern ergonomic design, is to determine the abrasion resistance of fabrics when rubbed against a standard abras... | |
Auto Air Permeability Test Apparatus for Fabric | Auto Air Permeability Test Apparatus for Fabric is used for fast, simple, and accurate determination of the air permeability of all kinds of flat m... | |
Grease Rapid Extraction Analyzer | The rapid extraction of oil and oil is specially used to quickly obtain the oil content of the top and similar materials. Through the container pen... | |
SAE J1756 vehicle windscreen fogging test equipment | Fogging tester is used to determine the windscreen fogging according to ISO, DIN, ASTM and other automotive standards. The equipment has a compact ... |