Yarn Length Measurement Meter
Yarn Length Measurement Meter
Standards：
FZ/T 70001-2003，FZ/T 71004-2003
Scope:
Used for measuring the cycle length of a variety of knitting wool, knitting wool circle. For checking that if the length of various linear density (count) hank girth compliance with standards.
Product details:
The stir yarn spread evenly apply a predetermined tension, according to the pointer, to determine whether the length of the loop skein standard
Structure:
Instrument uprights fixed on the base for securing the sleeve, the ruler, and the sleeve as the next slide. Equipped with rollers in the vertical sleeve, measured skein on the set on the roller can be changed on the sleeve is fixed to the vertical position to accommodate different length of the loop skein. Hank tension measured by standard quality selection of different weights, tension is applied via a lever on the measured hank.
Test Methods:
The upper end of the sample after the humidity balance in wool circle long sleeve length measuring instrument blade hanging plate, spread evenly so that the coil will be set at the lower end of the sample loop yarn length measuring long blade hanging inner panel, hang up predetermined weight, the lower plate slowly down to rest, within half a minute recording the scale readings accurate to 0.1cm. Hanging weight (including the lower blade plate weight 1.4kg) provides as follows
| 50g twist |
2.4kg |
| 62.5g twist |
3.0kg |
| 125g twist |
6.0kg |
Yarn length L Calculation method：A=(L-πd)/2
Detail：L--- the length of the yarn twist ;
A--- Roller center distance ;
d--- Roller diameter ;
Technical Parameters：
| Item |
parameter |
| roller diameter |
￠19mm |
| The maximum length of the measurement |
1800mm |
| Pressurization method |
Heavy Lever |
| Pressurized with heavy hammer |
300g，500g，1500g |
| Dimensions |
310×550×1100mm(L×W×H) |
| weight |
20kg |
Other supplier products
|
|
Leather Water Vapor Permeability Tester |
Standards:UNI EN IUP/15, UNI EN 13515, EN ISO 20344: 6.6, IUP 15, BS 3144 Method 24, SLP 25，DIN 53333, ISO 17699, DIN 53 429, METODO - 309 WI 009Ap... |
|
|
wyzenbeek oscillatory abrasion tester |
StandardASTM D4157：Standard Test Method for Wear Resistance of Textiles (Swing Roller Method)
Applications
Oscillator Abrasion Tester is also nam... |
|
|
Perspiration Tester |
Standards:
ISO 105 E01 E02 E04, BS 1006, AATCC 15 106 107, DIN 54005, M&S C6 C7, NEXT TM4, DIN EN ISO 105 E01 E02 E04, GB/T 3992 5713 5714
... |
|
|
Precision Fiber Microtome |
Precision Fiber Microtome
Testing Standards:
ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6
Applications:
Precision Fiber Microtom... |
|
|
EN 143 Mask Automatic Filtering Performance Tester |
The tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suita... |
All supplier products
Same products
