Sublimation Fastness Tester
Sublimation Fastness Testeris suitable for color fastness to hot pressing and dry heat test method test device fastness test method of resistance to dry heat color, fabric can be tested for color fastness, chlorine damage (resin finishing fabrics), cloth bleaching pan yellow test, disperse dyes sublimation color fastness test, reactive dye fastness test.
resistant ironing, or sublimation color fastness tester can test the fabric in hot, dry heat treatment of the dimensional stability;
Sublimation Fastness Testercan also test the fabric sublimation color fastness. Sample is placed between the upper and lower heating plate, the upper and lower heating plate temperature is accurately controlled by a separate controller, the heating plate spacing, the weight of the test piece controllable.
Test the temperature range of 120-230 ℃, with regular alarm function, accurate control of the sample time.
Technical Parameters
A, the hot plate for test: Size W100 × D40mm aluminum material (the same from top to bottom)
B, temperature regulation: digital temperature controller, the minimum display 1 ° C (upper and lower one)
C, the timing timer, audible alarm function
D, maximum temperature: 250 ° C
E, hot plate surface pressure: 4 ± 1 KPa (40cm2)
F, Heater: Cartridge Heaters 100V 150W (upper and lower one)
G, outside size: about W250 x D300 x H230mm
Other supplier products
|
|
Velcro Fatigue Tester |
Standards:DIN 3415，SATRA PM123
Product Information:Through the apparatus to achieve Velcro (hook & loop) to repeated stripping and peeling afte... |
|
|
Face Mask Particle Filtration Test Equipment EN149 PFE Tester |
The tester is used for performance testing of filter elements, disposable masks, filter media, etc. forFilter performance tester ofrespirator.It's ... |
|
|
carpet flammability equipment |
Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin... |
|
|
Absorbent properties tester |
Absorbent properties testercan be used for medical, sanitary nonwovens water absorption and water absorption of the determination of the instrum... |
|
|
iec60529 glow wire equipment |
Brief IntroductionThe glow wire tester operation instructions according to the GB5169 and GB4706the design and manufacturing requirements with the ... |
All supplier products
Same products
