Needle Flame Tester
The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Introduction
Technical Parameters
Items | Parameters |
Specimen | Synthetic materials |
Test standards | DIN EN 60695-11-5 |
Sensor | Temperature |
Power supply | 230 VAC / 15 VA |
Dimension | 500 x 400 x 300 mm (W x D x H) |
Weight | 15g |
Send product request
Other supplier products
Xenon Test Chamber/weather ometer | IntroductionWeather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal nat... | |
Carpet Flammability Test instruments | Standards:BS 4790, ISO 6925, BS 6307Applications:The Flammability Tester is used to test the effects of a small source of ignition on floor coverin... | |
multi-finger scratch/mar tester 710 | This type scratch tester made by Qinsun Company is multi-functional scraping instrument.Standards:GB/T 2918,GB/T 6151,GB/T 8424.3,PV3952,BMW GS9703... | |
Automatic Wrinkle Recovery Tester | Wrinkle Recovery Tester Testing Standards: AATCC 128, ISO 9867, ENKA 3061 Applications: AATCC Wrinkle Recovery Tester is used to determine a fa... | |
Protective clothing flame spread tester | Protective clothing flame spread tester is designed and manufactured according to the stan-dard of ISO 15025 protective clothing burning test . It ... |