Needle Flame Tester
The device use needle flame to simulate small flame effect resulted from equipment incorrect operation so as to evaluate fire hazard.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Expose the specimen to fire in a certain time. The temperature of the copper block is measured by K-type mineral insulated metal sheathed thermocouples (level 1) conforming to IEC 60584-2
The calibration device is capable of automatically measuring the time interval between 100 ° C and 700 ° C and calculating the mean value of the three measurements. The calibration device is also equipped with a digital-analog temperature output that can be used to measure the external time interval.
Introduction
Technical Parameters
| Items | Parameters |
| Specimen | Synthetic materials |
| Test standards | DIN EN 60695-11-5 |
| Sensor | Temperature |
| Power supply | 230 VAC / 15 VA |
| Dimension | 500 x 400 x 300 mm (W x D x H) |
| Weight | 15g |
在线联系供应商
Other supplier products
 |
vehicle windscreen fogging tester with SAE J1756 | Fogging tester is professionally designed for the fogging characteristics evaluation of volatile constituents of decorating materials used in cars ... |
 |
RCA Tape Abrasion Test Machine | RCA Tape abrasion test machineTape abrasion test machine make wear test of various surface coating consumption test with mobile , PDA, MP3, CD and ... |
 |
Digital Hydraulic bursting strength tester | Standards： GB/T7742, FZ/T60019, ISO 13938.2, NEXT TEST METHOD 22 2006 ,WOOLMARK TM29 2000,EDANA 80.3-99,ISO 2758,ASTMD 3786,JISL108 Scope of appli... |
 |
low-temperature Bending Test Machine | Standards: Chrysler LP-463LB-9-01, Chrysler LP-463KB-13-01, Chrysler LP-463KB-10-01, IFAI J1531, Commercial Standard CS-273-65? Applications: Th... |
 |
digital fabric elmendorf tearing strength tester | Standards: ASTM D1424/D689, NEXT 17, M&S P29, BE EN ISO 13937/4674, BS 4468, DIN EN 21974, GB/T 3917.1, ISO 1974 Applications: Digital Elmendo... |
