Textile far infrared emissivity tester
Introduction
With the continuous advancement of technology, new types of fibers and textile products have emerged, leading to increasingly high demands on textile performance. To meet these requirements, various performance tests must be conducted, including far-infrared emissivity testing. This document introduces the principles, applications, and compliance standards of textile far-infrared emissivity testers.
Compliance Standards
GB/T 30127.4-2013.ISO 18562-3:2017
Testing Principle
The textile far-infrared emissivity tester determines the far-infrared performance of various textile products (including fibers, yarns, fabrics, nonwovens, and their products) through far-infrared emission measurement. The principle involves:
1. Placing a standard blackbody panel and sample on a heating plate sequentially
2. Adjusting the heating plate temperature to specified levels
3. Using a far-infrared radiation measurement system with spectral response coverage of 5μm~14μm to measure the radiant intensity of both the standard blackbody and sample after thermal stabilization
4. Calculating the sample's far-infrared emissivity through the ratio of radiant intensity between sample and standard blackbody
Applications
This tester is widely used in textile quality control for:
- Evaluating far-infrared properties of natural fibers (cotton, wool) and synthetic fibers (polyester, nylon)
- Testing emissivity performance of yarns and fabrics in different textile structures
- Quality assessment of nonwoven materials and finished garments
- Providing data support for product design optimization and production process improvement
Key requirements include:
- Test temperature range: 25°C~45°C
- Spectral measurement range: 5μm~14μm
- Use of certified standard blackbody panels
- Temperature control precision: ±0.5°C
- Emissivity calculation method: Radiant intensity ratio between sample and reference
Conclusion
The textile far-infrared emissivity tester is essential equipment for evaluating thermal radiation properties of textiles. Its applications include:
✅ Quality control of functional textiles (warmth-retaining, moisture-wicking)
✅ Performance evaluation of new fiber blends
✅ Research and development of smart textile materials
✅ Compliance testing for international market access
To ensure accurate results, strict adherence to standard operating procedures and regular calibration using certified reference materials are required.
Specification
| Item | Detail |
| Measuring range | 0.01-1.00 |
| Wavelength | 5-14μm |
| Testing temperature | 34℃ |
| Thermal plate | Φ60mm |
| Power supply | 220V 50-60 Hz |
| Dimensions | 160mm×180mm×350mm 6.30inch×7.07inch×13.78inch |
| Net weight | 15 kg 33.07lb |
Send product request
Other supplier products
 |
Geosynthetic acid and alkali aging tester | Scope of application: Test method for acid-resistant lye properties of various geosynthetic materials; The machine has stirring function, the solu... |
 |
Automatic folding recovery tester | Instrument Introduction This instrument detects the recovery property of fabrics by applying specific test methods (BS, ISO, AATCC). It presses fa... |
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Air - tightness Testing Device for Automotive Connectors | The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe... |
 |
Needle Flame Tester | Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
