Impact strength tester for car seat launching headrest
Main parameters:
Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle collision or deceleration. The specific speed value should be determined according to the test criteria and the type of seat.
Impact head type:Impact head type is a component that simulates the shape and quality of the passenger head, and its parameters such as diameter and equivalent mass should meet the requirements of relevant standards. The common impact head type has a diameter of 165mm and an equivalent mass of about 6.8kg.
Measurement accuracy:The measurement accuracy of the tester includes impact velocity measurement accuracy, acceleration measurement accuracy, etc. These precision parameters determine the accuracy and reliability of the test results. Generally speaking, the impact velocity measurement accuracy should be about ±1%, and the acceleration measurement accuracy should be about ±3%.
Adjustment range:The impact arm of the tester usually has a large adjustment range in the Z direction to adapt to different seat types and test needs. At the same time, the Angle of the impact arm can also be adjusted to simulate the collision situation at different angles.
Data acquisition and processing:The tester should be equipped with a high-speed data acquisition system, which can record various data in the test process in real time, such as impact speed, acceleration, deceleration, etc. At the same time, the data should be able to be subsequent processed and analyzed to produce accurate test results.
Safety protection:The tester should have perfect safety protection measures, such as safety protection net, emergency stop button, etc., to ensure the safety and reliability of the test process.
Features：
Pneumatic launch system with velocity control
3D high-speed impact analysis (100,000 fps)
Biofidelic neck injury criteria calculation
Automatic rebound prevention mechanism
Crash pulse reconstruction capability
Standards：
FMVSS 202a (Head Restraints)
ECE R17 (Vehicle Seat Strength)
ISO 17373 (Road vehicles - Head restraints)
IIHS Head Restraint Rating Protocol
Euro NCAP Whiplash Assessment
Send product request
Other supplier products
 |
Geosynthetics Vertical Penetration Tester | Scope of application: Used to determine the vertical permeability of geotextile and its related products under constant water head method. The wat... |
 |
Automatic Cross-Hatch Tester | Standards Automotive Standards: PV 3952. Ford BN 108-03. BMW 0180. DAF KEUR 00824-401. GME 60401. GM 14829. Jaguar-Landrover TPJLR.52.00. GM N 146... |
 |
Paper Crease Stiffness Tester | Product Introduction: ZY-TDY300 microcomputer bending stiffness tester is used to measure the bending stiffness of paper and cardboard materials w... |
 |
Rotating Cip Tank Spray Balls | Application: Rotating tank washing spray nozzle STD 10 micro whirly 360 spray cip spray nozzle ,spray balls for tank cleaning Rotary spray ball u... |
 |
AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires-QINSUN | Application Scope: 1. Record the temperature change of conductors in connectors under a certain current. 2. Record the magnitude of the current... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
|
|
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
