Fabric Anti-Electromagnetic Radiation Performance Tester

Standards

GB/T23326. GB/T25471. ASTM D4935. SJ2054

Application

It is used for testing the electromagnetic shielding effectiveness of electromagnetic shielding materials such as textiles, plastic sheets, metal foils, surface coatings or platings of non-conductive materials, metal meshes, conductive films, conductive glasses, and conductive medium plates (using the coaxial method).

Features

1. The instrument adopts the coaxial test method, with good transmission characteristics and high testing accuracy.

2. It can perform full-frequency scanning, list scanning, and point-frequency measurement.

3. It uses the internationally preferred coaxial test method to measure the shielding effectiveness of materials, with good transmission characteristics and improved testing accuracy.

4. The instrument automatically controls the emission and reception of signals, automatically collects and processes data, displays curves on the LCD screen, and prints test data with a micro printer, which is easy to operate.

5. The evaluation of the absorption and reflection performance of planar materials against electromagnetic waves can be obtained by calculating the measured parameters.

6. RS232 data interface, with computer software for curve display, data analysis, and storage.

7. It provides a USB interface and supports mobile data storage with a USB flash drive.

Technical Parameters

1. Signal Source:

1.1 Test frequency range: 300 KHz - 3000 MHz

1.2 Frequency stability: ≤ ±5×10⁻⁶

1.3 Frequency resolution: 1 Hz

1.4 Signal purity: ≤ -65dBc/Hz (at 10 KHz offset)

1.5 Output level: -45dBm - +10 dBm

1.6 Level accuracy: ≤ ±1.5dB (25°C ± 5°C, -45dBm - +5 dBm)

1.7 Harmonic suppression ratio: ≥30dB (1MHz - 3000MHz), ≥25dB (300KHz - 1MHz)

1.8 Directivity: ≥50dB (after vector calibration)

1.9 Power scanning: -8dBm - +5dBm

1.10 System impedance: 50 ohms

2. Receiver:

2.1 Frequency range: 300KHz - 3000MHz

2.2 Resolution bandwidth: 100 Hz - 20 KHz

2.3 Dynamic range: ≥95 dB (RBW = 1 KHz)

2.4 Maximum input level: +10dBm

2.5 Input damage level: +20dBm (DC +25V)

2.6 Port: Standing wave ratio ≤1.2

3. Phase Characteristics:

3.1 Phase resolution: 0.01°

3.2 Phase trajectory noise: 0.5° @ RBW = 1KHz, 1° @ RBW = 3KHz (25°C ± 5°C, 0dBm)

4. Transmit and Receive Frequencies:

4.1 Transmit frequency: 20MHz - 1.3GHz

4.2 Transmit frequency drift:<1000Hz

4.3 Minimum hopping interval of transmit frequency: 1MHz

4.4 Transmit output power: >13dBm

4.5 Receive power dynamic range: +5dBm - -55dBm

4.6 Receiver power accuracy: ±1dB

4.7 Resolution: 0.01dB, receiver frequency test range: 10MHz - 3GHz

4.8 Double-layer shielding effectiveness: >20dB

5. Specimen Dimensions:

5.1 Circular: Diameter 180mm - 200 mm

5.2 Square: 180mm×180mm - 200mm×200mm

5.3 Specimen thickness: 0 - 5mm

6. Instrument Specifications:

6.1 Working environment temperature and humidity: 0 - 40°C, 0 - 75%RH

6.2 Power supply: AC220V ± 30V, 50Hz, 100W

6.3 Overall dimensions: 70mm×50mm×75mm (L×W×H) (excluding computer)

6.4 Weight: Approximately 75kg

Optional Instrument Configurations

1. One main unit

2. One branded computer

3. One branded printer

Other supplier products

	AC/DC Current - Carrying Temperature - Rise and Voltage - Drop Test System for Automotive Wires	Application Scope: 1. Record the temperature change of conductors in connectors under a certain current. 2. Record the magnitude of the current p...
	High-Power Lamp tube （1500W~12000W)	Applicable Standards High-power lamp tubes adhere to global safety and performance benchmarks, including: IEC 60598-1(Luminaires – Genera...
	Sand and Dust Test Chamber-QINSUN	The sand and dust test chamber for automotive connectors meets the requirements of protection - class tests for the enclosures of household appli...
	Thermal Elongation Tester	Standard IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths. ASTM D638: Standard test method for ten...
	Multilayer geotextile single-layer thickness tester	Meet the standard GB/T17598-1998. GB/T 13761.1-2022, JTG E50-2006, IS09863-90 Scope of application The multi-layer sample is mechanically separa...

All supplier products

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...