Fabric Anti-Electromagnetic Radiation Performance Tester

Standards

GB/T23326. GB/T25471. ASTM D4935. SJ2054

Application

It is used for testing the electromagnetic shielding effectiveness of electromagnetic shielding materials such as textiles, plastic sheets, metal foils, surface coatings or platings of non-conductive materials, metal meshes, conductive films, conductive glasses, and conductive medium plates (using the coaxial method).

Features

1. The instrument adopts the coaxial test method, with good transmission characteristics and high testing accuracy.

2. It can perform full-frequency scanning, list scanning, and point-frequency measurement.

3. It uses the internationally preferred coaxial test method to measure the shielding effectiveness of materials, with good transmission characteristics and improved testing accuracy.

4. The instrument automatically controls the emission and reception of signals, automatically collects and processes data, displays curves on the LCD screen, and prints test data with a micro printer, which is easy to operate.

5. The evaluation of the absorption and reflection performance of planar materials against electromagnetic waves can be obtained by calculating the measured parameters.

6. RS232 data interface, with computer software for curve display, data analysis, and storage.

7. It provides a USB interface and supports mobile data storage with a USB flash drive.

Technical Parameters

1. Signal Source:

1.1 Test frequency range: 300 KHz - 3000 MHz

1.2 Frequency stability: ≤ ±5×10⁻⁶

1.3 Frequency resolution: 1 Hz

1.4 Signal purity: ≤ -65dBc/Hz (at 10 KHz offset)

1.5 Output level: -45dBm - +10 dBm

1.6 Level accuracy: ≤ ±1.5dB (25°C ± 5°C, -45dBm - +5 dBm)

1.7 Harmonic suppression ratio: ≥30dB (1MHz - 3000MHz), ≥25dB (300KHz - 1MHz)

1.8 Directivity: ≥50dB (after vector calibration)

1.9 Power scanning: -8dBm - +5dBm

1.10 System impedance: 50 ohms

2. Receiver:

2.1 Frequency range: 300KHz - 3000MHz

2.2 Resolution bandwidth: 100 Hz - 20 KHz

2.3 Dynamic range: ≥95 dB (RBW = 1 KHz)

2.4 Maximum input level: +10dBm

2.5 Input damage level: +20dBm (DC +25V)

2.6 Port: Standing wave ratio ≤1.2

3. Phase Characteristics:

3.1 Phase resolution: 0.01°

3.2 Phase trajectory noise: 0.5° @ RBW = 1KHz, 1° @ RBW = 3KHz (25°C ± 5°C, 0dBm)

4. Transmit and Receive Frequencies:

4.1 Transmit frequency: 20MHz - 1.3GHz

4.2 Transmit frequency drift:<1000Hz

4.3 Minimum hopping interval of transmit frequency: 1MHz

4.4 Transmit output power: >13dBm

4.5 Receive power dynamic range: +5dBm - -55dBm

4.6 Receiver power accuracy: ±1dB

4.7 Resolution: 0.01dB, receiver frequency test range: 10MHz - 3GHz

4.8 Double-layer shielding effectiveness: >20dB

5. Specimen Dimensions:

5.1 Circular: Diameter 180mm - 200 mm

5.2 Square: 180mm×180mm - 200mm×200mm

5.3 Specimen thickness: 0 - 5mm

6. Instrument Specifications:

6.1 Working environment temperature and humidity: 0 - 40°C, 0 - 75%RH

6.2 Power supply: AC220V ± 30V, 50Hz, 100W

6.3 Overall dimensions: 70mm×50mm×75mm (L×W×H) (excluding computer)

6.4 Weight: Approximately 75kg

Optional Instrument Configurations

1. One main unit

2. One branded computer

3. One branded printer

Other supplier products

	Thermal Protective Performance Tester (TPP)	The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through...
	AC/DC High - Voltage Testing Machine for Automotive Wires	Standards ISO 6722. ISO 14572: International standards for automotive cables and electrical continuity. IEC 60529: IP code compliance for dust/...
	Cantilever Fabric Stiffness Tester	Standard ZB WO4003. GB/T18318. ASTM D 1388. IS09073-7. BS EN22313 Application Fabric Stiffness Tester, is a practical equipment to determine t...
	Glow wire tester	F242 Glow-wire tester, By simulating the thermal stress caused by heat source or ignition source such as hot component or overload resistor in a sh...
	Footwear Cold Insulation Tester	Product Introduction Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test...

供应产品

Same products

	Tabletop Xenon Arc Weathering Tester (SunMaster)	卖方: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat...
	Blow-By Test Rig	卖方: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa...
	Air filter System（ISO 16890/EN 779）	卖方: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a...
	Oil Thread Leak Test System	卖方: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ...
	Manual HEPA/ULPA Filter Scanning Test System	卖方: Standard Groups	Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan...