Electronic single fiber strength meter
Compliance Standards
- GB/T14337
- GB/T9997
- GB/T13835.5
- GB/T21120
- ISO5079
- ISO11566
- ASTM D3822
- BS4029
Application Scope
- Used for determining the following properties of various single fibers:
- Breaking strength
- Initial modulus
- Elongation at break
- Load at a specified elongation
- Elongation at a specified load
- Creep
Instrument Features
1. Microcomputer-controlled with online communication support.
2. High-precision, high-speed force measurement system for accurate test data.
3. Patented pneumatic clamps with constant clamping force to ensure full contact between the clamp faces, preventing sample damage or slippage during experiments.
4. Low-noise and stable drive system composed of high-precision ball screws and high-performance stepper motors from internationally renowned brands.
5. Direct connection to a computer via a high-speed USB port, providing detailed historical test data, reports, graphics, and database establishment capabilities.
6. Large-screen LCD with Chinese menu display for intelligent interface and human-machine interaction, with a printer outputting Chinese reports and curve graphics.
7. Capable of storing 300 test data sets with power-off memory function.
8. LED lighting in the operating area with soft light for convenient sample handling and testing.
Technical Parameters
| Parameter | Specification |
|---|---|
| Mode | Constant rate of elongation (CRE) |
| Clamping Method | Pneumatic clamping |
| Force Measurement Range | 0~200cN |
| Resolution | 0.01cN |
| Measurement Accuracy | ±0.5% |
| Gauge Length | 5~60mm (digital setting) |
| Maximum Elongation | 130mm |
| Tensile Speed | 2~100mm/min (digital setting) |
| Test Modes | - Constant speed tensile - Load at a specified elongation - Elongation at a specified load - Creep - Initial modulus |
| Data Output Methods | - LCD Chinese menu display: Displays all set parameters and test values - Printout: Test reports and tensile curve graphics (computer required) |
| Printer Configuration | 24-pin dot-matrix printer |
| Power Supply | AC220V±10%, 50W |
| Dimensions | H450×W510×D580mm |
Send product request
Other supplier products
 |
Fully Automatic AC/DC High - Voltage Tester for Wires and Cables | The fully automatic AC/DC high - voltage tester for wires and cables is specially used to test the insulation between wire cores or between wire ... |
 |
Drum Opener | Specifications Model Body Material Blade Material Weight (kg) Length (cm) STD-200-S Steel Hardened Steel 3 47... |
 |
Nissan Scratch Tester-QINSUN | Standard ASTM D7027(Standard Test Method for Scratch Resistance of Polymeric Coatings and Plastics) ISO 1518(Paints and Varnishes — Determi... |
 |
Qinsun Xenotest 220 | Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3): Accelerated weathering for textiles under controlle... |
 |
Geosynthetic Clogging Tester | Scope of application: The method of gradient ratio is used to measure the permeability coefficient and permeability ratio of soil and geotextile s... |
Same products
 |
Tabletop Xenon Arc Weathering Tester (SunMaster) | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Water-Cooled Xenon Lamp Weat... |
 |
Blow-By Test Rig | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test system for the characterisa... |
 |
Air filter System（ISO 16890/EN 779） | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Filter test system for general a... |
 |
Oil Thread Leak Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com Test System for oil thread leak ... |
 |
Manual HEPA/ULPA Filter Scanning Test System | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Manual HEPA/ULPA Filter Scan... |
