Fire retardant coatings tester tunnel method
Product Introduction
The fire retardant coating flame propagation tester is suitable for testing the flame propagation characteristics of the fire retardant coating on the surface of the substrate under laboratory conditions, and evaluating the protection effect of the fire retardant coating on the substrate and its flame propagation performance.
Standards
GB/T12441-2005
GB12441-2018
JL-SDF-2
Working conditions
Ambient temperature :5——35℃
Relative humidity: not more than 85%
Working environment: indoor without forced ventilation
Power supply :AC200——240V, 50HZ
Technical parameters
Burner top diameter :20mm, height about 200mm
Burner blue flame temperature :(900±20) "C
Combustible gas source: natural gas, liquefied petroleum gas or city gas
Thermocouple: armored thermocouple with precision of work grade, K division and outer diameter not greater than 3mm
Electronic potentiometer: The error is less than ±0.5% of the measured temperature
High voltage electronic ignition system
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Send product request
Other supplier products
 |
small to medium sized tanks cleaning nozzles | High impact rotary tank cleaning nozzle Model NO.: STD 4 Working Principle: Impeller is driven by cleaning fluid and drives internal reduction m... |
 |
Seam Fatigue Tester for Textile & Apparel Durability-QINSUN | Standard ISO 13935-1/2(Textiles – Seam Fatigue Testing for Woven Fabrics) ASTM D1683(Standard Test Method for Failure in Sewn Seams of Wove... |
 |
Automotive Wires Low - temperature Impact Tester | Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2... |
 |
Automotive Seat Belt Buckle Bending Test Machine-QINSUN | Standard ISO 10195(Seat Belt Anchorage Hardware - Test Methods) ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restrain... |
 |
Automobile Wire Cross-linking Test Device | Applicable Standards: SAE J1128 - 2005 and other standards Main Parameters: 1. Test rod: Φ6mm, 300mm in length 2. Hot plate specification... |
Same products
 |
HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line | Seller: Shandong HUASU Plastic Technology Co.,Ltd. | The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi... |
 |
PanEVAP & MVR system | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat... |
 |
PanGAP wide gap welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel... |
 |
PanBloc welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac... |
 |
PanBox welded plate heat exchanger | Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd | PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated... |
