Shoe Abrasion Tester

Product Introduction:

The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press the rotating grinding head vertically above the sample, and carry out rotary wear test on the test sample at a certain load weight and a speed of 191r/min. After the test is completed, the wear length of the sample is measured to evaluate whether the sample is qualified.

Reference standard:

GB/T 3903.2-2017, QB/T4329-2012 and other standards

Product Advantages:

Measures Key Durability: Quantifies the wear resistance of shoe soles, a direct indicator of footwear durability and expected lifespan.

Standard Compliant: Designed to meet national standards (GB/T 3903.2. QB/T 4329) for shoe wear testing.

Controllable Test Parameters: Allows for precise control of load, speed, and test time according to standard requirements.

Uses Standardized Abrasive: Utilizes a grinding wheel with detailed specifications to ensure consistent abrasive action.

Provides Quantitative Measurement: Enables evaluation based on wear length measurement (or potentially mass loss using the integrated balance).

Suitable for Soles and Materials: Applicable for testing both finished soles and samples of sole materials.

Includes Integrated Balance: The presence of a balance facilitates wear assessment by mass loss if required by the test method or user preference.

Product Features:

Rotary grinding head with a specified grinding wheel.

Mechanism for applying a vertical load (pressure) to the sample via the grinding head.

Sample holder to securely position the sole or sole piece for testing.

Motor and control system to rotate the grinding wheel at a controlled speed (191 ± 5 r/min, adjustable).

Timer to control the duration of the test (20 minutes, adjustable).

Detailed specifications for the grinding wheel, ensuring a standardized abrasive surface.

Integrated balance for weighing samples (5000g range, 0.5g accuracy).

Likely includes a counter to track the number of rotations.

Designed for operation within specific temperature and humidity ranges.

Robust construction suitable for repeated use in a laboratory or quality control environment.

Method for measuring wear length (as mentioned in the introduction) - this could be a manual measurement using a scale after the test or an integrated measurement system, although not explicitly detailed.

Technical specifications:

Performance: Accurate weighing, stability, good repeatability, the use of environmental requirements: at a specific temperature （23±2℃）， measuring the weight of the material and water

Speed: （191±5）r/min（adjustable）

Load: 500g（5g-500g optional）

Test time: 20 minutes （adjustable）

Grinding wheel: 20±0.1 diameter 4±0.1mm thick, T12 steel grinding wheel, with 72 teeth, tooth Angle 90°±5°, tip width 0.2±0.05mm, tip roughness Ra=3.2um, hardness HRC³55, coaxiality 0.03mm

Balance range: 5000g, accuracy: 0.5g

Volume: 560×510×830mm

Weight: 70kg

Power supply: AC220V,10A

Other supplier products

	Vibration and Abrasion Resistance Tester for Automotive Wire-to-Wire	Standard ISO 6722: Road vehicles – Flexible cables for wiring harnesses SAE J1128: Low-voltage primary cable for automotive application...
	Cable extrusion tester	Applicable Standards The tester adheres to international standards for cable mechanical testing, including: ISO 6722-1(Road vehicles – El...
	Fogging Tester	Standards DIN 75201: Automotive trim material fogging resistance. ISO 6452: Coated fabrics fogging behavior in vehicle interiors. SAE J1756: A...
	Fabric liquid penetration tester	Main Parameters 1. The penetrating disc is made of special organic glass through special processing, ensuring a weight of 500 grams ± 5 gra...
	Automobile wire corrugated pipe drag grinding machine	Standards: ISO 6722. QC/T730. JIS C 3046. JASO D 611. SAEJ1128-2005. JBT 8139.TBT 1484.1-2001 Part1. EN50305. EN50306and other standards Parame...

All supplier products

Same products

	Air Intake Filter Test System	Seller: Standard Groups	The Air Intake Filter Test System is designed for testing industrial air filters and engine air f...
	Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging	Seller: Standard International Group (HK) Limited	The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f...
	Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester	Seller: Standard International Group (HK) Limited	The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter...
	HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine	Seller: Standard International Group (HK) Limited	The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ...
	VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine	Seller: Standard International Group (HK) Limited	The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia...