Ross Flex Tester
Product Introduction:
The ROSS zigzag resistance tester installed the sole strip test piece on the ROSS zigzag test machine, so that the cut is directly above the center of the rotating shaft of the ROSS zigzag test machine, and drove the test piece to perform free 90-degree zigzag on the shaft through the ROSS zigzag test machine. After a certain number of tests, the length of the test piece incision is measured. The zigzag resistance of the test piece was evaluated by the size of the notch growth rate.
Reference standard:
GB/T2099-2007. ASTM-D1052. ISO-5423. SATRA TM60. HB-T2411HG/ T2411 and other standards
Product Advantages:
Measures Key Durability: Quantifies the resistance of sole materials to flex cracking and notch growth, a vital indicator of footwear lifespan.
Standard Compliant (ROSS Method): Designed to meet numerous relevant international and national standards (ASTM D1052. SATRA TM60. etc.) specifically for the ROSS flex test.
Quantitative Result: Provides objective data based on the measured growth rate of the pre-cut notch.
Multiple Testing Stations: Allows simultaneous testing of multiple test pieces (12), significantly increasing testing efficiency.
Controllable Test Parameters: Enables precise setting and control of the bending angle (90$pm$2º) and flexing speed (0-100 r/min).
Automatic Stop Function: Can be set to stop automatically after a specified number of test cycles.
Suitable for Sole Materials: Specifically designed for evaluating the flex fatigue characteristics of sole strips.
Random configuration:
1. One machine
2. 1 knife die
3. One power cable
4. One cutting knife
5. One copy of instructions
6. One delivery note
Technical parameters:
1. simultaneous measurement: (12 test pieces)
2. bending Angle: 90±2º
3. speed: 0-100r/min can be switched.
4. controller: LED-SLD806 integrated display control function
5. hole punch: 2.5mm
6. Test mode; Automatic stop when the test time is reached
7. fixture features: can test the sole at the same time can test pieces
8. zigzag shaft diameter: 10mm.
9. sample method: sole test piece
10. sample size: 152×25mm
11. Power supply: AC220V,10A
Send product request
Other supplier products
 |
Leather Bending Resistance Tester | Applicable Standards The tester adheres to global standards for leather physical testing, including: ISO 5402-1(Leather – Physical and me... |
 |
Car seat static strength tester-QINSUN | Applicable standards: GB 11550-2009"Car seat headrest strength requirements and test methods" : This standard specifies the static strength test r... |
 |
Aerospace Fluorine-containing Wire Dynamic Cutting Through Tester | Applicable standards: GJB773B and other standards in the annex G dynamic cutting test requirements Applicable industry: This instrument is the... |
 |
Gantry Vision Measuring Machine | Standard: ISO9001 Product advantages: Longmen Automatic image measuring instrument is specially designed for large size measurement, with a ma... |
 |
Rating Observation Board-QINSUN | Product Overview TheRating Observation Boardis an intelligent monitoring system designed for real-time evaluation and visualization of product qua... |
Same products
 |
Common Rail Injector Valve F00R J02 012 | Seller: 868983 | Common Rail Injector Valve F00R J02 012 David Chen |
 |
Common Rail Injector Valve F00R J02 005 | Seller: 868983 | Common Rail Injector Valve F00R J02 005 David Chen |
 |
Common Rail Injector Valve F00R J01 945 | Seller: 868983 | Common Rail Injector Valve F00R J01 945 David Chen |
 |
Common Rail Injector Valve F00R J01 941 | Seller: 868983 | Common Rail Injector Valve F00R J01 941 David Chen |
 |
Common Rail Injector Valve F00R J01 924 | Seller: 868983 | Common Rail Injector Valve F00R J01 924 David Chen |
