Helmet UV Pretreatment Box Tester
Product Introduction:
Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national standard GB/T 2812-2006 "Helmet test method", GB/T 2811-2019 "helmet" development, widely used in special labor protection equipment supervision and inspection station, building science research institute, construction engineering inspection station.
Standards
EN, ISO, ASTM, SATRA, AATCC, JIS, BS, DIN, GB,
Product Advantages:
Performs Standardized Pretreatment: Provides a controlled environment for UV irradiation according to relevant safety helmet testing standards.
Simulates Natural Aging: Replicates the aging effects of sunlight exposure on helmet materials, preparing them for realistic performance assessment.
Essential for Durability Testing: Allows laboratories to evaluate the long-term durability and safety of helmets after simulated UV degradation.
Standard Compliant: Developed in accordance with national standards GB/T 2812 and GB/T 2811.
Efficient: Capable of pretreating multiple helmets simultaneously.
Widely Used: Adopted by key testing and research institutions in the field of labor protection equipment.
Controllable Exposure Time: Features a timer to control the duration of UV irradiation.
Product Features:
UV irradiation chamber or enclosure designed to contain safety helmets during exposure.
Specific ultraviolet radiation source (450W high pressure short pulse xenon lamp) designed to emit UV radiation that simulates the spectrum of sunlight.
Cooling method (air-cooled) to manage the heat generated by the UV lamp, maintaining a controlled temperature environment within the chamber (although specific temperature control parameters are not listed).
Internal rack or fixture system capable of holding multiple helmets (from 1 to 14) in position for uniform UV exposure.
Timer with a wide range (0-999 hours) to control the duration of the UV irradiation pretreatment.
Robust construction suitable for laboratory use and the specific environmental conditions required for UV aging.
Safety features (implied) to prevent operators from being exposed to harmful UV radiation during operation.
Main parameters:
1. ultraviolet radiation source: 450W high pressure short pulse xenon lamp
2. Cooling method: air-cooled
3. timing range: 0-999 hours
4. the number of pretreatment helmets: 1--14
Send product request
Other supplier products
 |
Sewer Pipe Cleaning Machine | For sewer clean，pipe clean, industry tube clean, tank clean, oil removal, ground surface clean. Features: Mobile Design：Very compact machine, eas... |
 |
Spray Rating Tester-QINSUN | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
 |
Wire Cut - through Tester for Ford Automotive Wires | Applicable Standard: Engineering Specification - Ford Global Wire specification, PART NO. ES - AU5T - 1A348 - AA Technical Parameters: 1. Sens... |
 |
Dry Cleaning & Washing Cylinder | Introduction The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.... |
 |
Pumpability tester | Product Introduction The pumpability tester is dedicated to accurately testing the pumpability of the shield tail seal grease used in shield const... |
Same products
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard Groups | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
Sliding bearing PV friction testing machine | Seller: Standard Groups | The sliding bearing PV friction testing machine is primarily used to evaluate the friction and we... |
 |
High temperature vacum friction & wear tester | Seller: Standard Groups | High temperature vacuum friction and wear testing machine is mainly used to study the friction an... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard Groups | Dry and wet sand abrasive wear testing machine is mainly used to evaluate the wear resistance of ... |
 |
Thrust Washer Friction Testing Machine | Seller: Standard Groups | The thrust washer friction testing machine is mainly used to simulate the frictional contact of m... |
