Fogging Tester

Produced by: Standard International Group (HK) Limited

All supplier products

Standards

DIN 75201: Automotive trim material fogging resistance.
ISO 6452: Coated fabrics fogging behavior in vehicle interiors.
SAE J1756: Automotive interior material fogging test protocol.
BS EN 14288 & QB/T 2728: Leather and textile fogging evaluation.
PV 3920/3015: VDA-standard fog value determination for non-metallic materials.
ES-X83231, NES M0161, GM 9305P: OEM-specific fogging requirements for automotive suppliers.

Product Advantages

Triple Testing Modes: Supports gloss, gravimetric, and haze analysis for comprehensive material evaluation.
Precision Temperature Control: ±0.1°C accuracy across high/low baths (room temperature to 150°C) ensures repeatable results.
Six-Station Efficiency: Simultaneous testing of six samples accelerates R&D and QC workflows.
Corrosion-Resistant Design: 316 stainless steel test chambers and epoxy-coated steel frame withstand harsh chemical environments.
Advanced Safety: Magnetic safety switch, over-temperature thermostat, and audible test-completion alerts.
Data Connectivity: USB port and multi-function sensors enable seamless integration with lab information systems.

Product Features

Dual-Bath System:
- High-Temperature Bath: 670×490×540mm, 3kW heating power (up to 150°C).
- Low-Temperature Bath: 400×220×520mm, 500W cooling capacity (0–100°C).
Automated Controls:
- Digital thermoregulator with microprocessor for precise temperature programming.
- Programmable timer (1–9999 min) with auto-stop and end-test buzzer.
Modular Accessories:
- 18/8 stainless steel test cups, flat beakers, and chrome steel rings for sample mounting.
- Six interchangeable cooling plates and haze/gloss measurement kits.
Safety Compliance:
- CE-certified with anti-acid epoxy coating, emergency stop, and overpressure relief.

Technical Parameters

Parameter	Specification
High-Temperature Range	Room temperature – 150°C (280°C optional)
Low-Temperature Range	0–100°C
Temperature Stability	±0.1°C (at 200°C)
Heat-Up Time	<45 min (to 150°C)
Cooling Capacity	500W (low bath)
Power Supply	AC 220V, 50Hz, 3.5kW
Dimensions	500 (W) × 650 (D) × 600 (H) mm
Net Weight	50 kg (excluding thermal media)
Data Interface	USB 2.0, remote sensor compatibility
Safety Systems	Magnetic switch, thermostat, audible alerts

Send product request

	Automotive Wires Low - temperature Impact Tester	Test standard: ISO 6722. ISO 14572. ISO 19642. SAEJ 1128. QC/T 730. JASOD611-2009 Technical parameters: 1) Low temperature impact height: 50-2...
	Needle Flame Tester	Standard GB/T 5169.5: Electrical & Electronic Equipment – Needle Flame Test Method IEC 60695-11-5/IEC 60695-2-2: Fire Hazard Testing &n...
	Thermostatic water tank tester	Scope of application: Thermostatic water tank is widely used in drying, concentrating, distillation, impregnating chemical reagents, impregnating ...
	Building material combustion calorific value calorimeter	Building material combustion calorific value calorimeter Mainly used for the detection of stone, wood, concrete, evenly dispersed mineral wool and ...
	Friction Tester for Non - woven Fabrics	Instrument Description This fabric friction tester can measure the static and kinetic friction coefficients of non - woven fabrics. It can be used...

Seat Bumping and Creep Test Bench	Seller: Standard International Group (HK) Limited	This test bench is used for simulating the car seat bumping and creep situation when a car is run...
Automobile seat belt fixed point test bench	Seller: Standard International Group (HK) Limited	Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur...
Impact strength tester for car seat headrest	Seller: Standard International Group (HK) Limited	Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi...
Impact strength tester for car seat launching headrest	Seller: Standard International Group (HK) Limited	Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w...
Automobile Headrest Strength Tester	Seller: Standard International Group (HK) Limited	Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me...