Roughness profiler
Product Introduction:
The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measurement. Its main advantage is that it can directly measure the surface of some parts that are difficult to measure, such as the surface roughness of holes, slots, etc., and can directly read or describe the shape of the surface contour curve according to some evaluation standard, and the measurement speed is fast, the results are reliable, the operation is easy to measure the plain line shape of various precision machinery parts, straightness, Angle, crown logarithm curve, depth, width and other parameters.
Optional:
The double needle profiler detects the middle diameter of thread, groove diameter and inner diameter.
Standard:
ASTME950/E950M-22
AASHTOR56-14
AASHTOR57-14
AASHTOM328-14
ASTME
EN13036-6:2008
ISO3274:1975
GB/T6062-2002
JISB0633:2001
ISO21920-1:2021
ISO4288:1996
Product features:
This series of instruments are widely used in machining, motor, auto parts, motorcycle parts, precision hardware, precision tools, tools, molds, optical components and other industries. Applicable to scientific research institutes, universities, metrology institutions and enterprises measuring rooms, workshops. Measuring bearing, needle roller, roller, motor shaft, crankshaft, cylindrical pin, piston pin, piston, valve, valve, gear, oil pump nozzle, hydraulic parts, pneumatic parts, spinning machine accessories, etc.
Technical parameters:
Measuring range :X direction :100mm, contour measuring range :20mm, 40mm, 60mm
Z-axis operating height :400mm
Minimum measuring hole :25mm
Linear accuracy :±（1.2+10.15H|）um
Arc :±（1.5+R/12）um
Angle :±1'
Straightness :0.5um/100mm
Optical resolution :0.01um
Measurement speed （contour）：0.02mm to 4.0mm/s
Climb Angle: up 77 degrees, down 88 degrees
Send product request
Other supplier products
 |
Smoke - Emission Testing Machine for Aerospace Wires and Cables | Standards Compliance: U.S. Military Specifications: MIL-W-5086C & MIL-W-22759D (smoke density and toxicity limits for wiring). Chinese Nation... |
 |
AATCC Gray Scale for Color Change | Applicable Standards The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including: AATCC Evaluation Procedure... |
 |
STD series micro whirly rotating nozzle for cleaning of asep | Micro whirly rotating nozzle Working Principle: Using the force and reaction force of cleaning liquid to generate self-rotation,through scientifi... |
 |
Thermal Elongation Tester | Standard IEC 60811-1-1: Electric cables – Thermal elongation tests for insulations and sheaths. ASTM D638: Standard test method for ten... |
 |
Heat insulation efficiency limit test furnace | Product Introduction: Heat insulation efficiency and fire resistance test furnace of steel structure fire retardant coatings is a special instrume... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
