Car seat fatigue tester-QINSUN
Applicable standards:
GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polymer materials for car seats, including reciprocating compression test, etc., which is suitable for the fatigue performance test of foam materials for car seats.
ISO 3385-1989: This is an international standard that specifies the compression fatigue test method for soft foam polymer materials, which is also applicable to the fatigue performance test of automotive seat foam materials.
QC/T 56-93"Performance Test method of Car Seat Liner Material" : This standard is the industry standard of China's automotive industry, which specifies the performance test method of car seat liner material, including fatigue test.
Main parameters:
Loading impact force:The tester usually has a certain range of loading impact force, which is used to simulate the load borne by the seat in actual use. For example, some models of testers can load impact forces up to 750N or higher.
Reciprocating compression frequency:The reciprocating compression frequency of the tester indicates the number of compression-release cycles performed per unit time. This parameter can usually be adjusted within a certain range to suit different test requirements. For example, some models of testers can compress up to 75 times/minute or more.
Reciprocating compression stroke:The reciprocating compression stroke refers to the maximum distance the tester moves during compression. This parameter determines the range of loads that the tester can simulate. In general, reciprocating compression stroke between 150mm and 180mm is more common.
Disc diameter:The disc is a component used to apply loads, and its diameter can affect the accuracy and reliability of test results. The diameter of the pressure disc may vary from model to model.
Number of tests:The tester can usually set the number of tests to achieve a predetermined test cycle. The number of tests should be set according to the specific test criteria and seat type.
Display and control:Modern car seat fatigue testers are usually equipped with advanced display and control systems, which can display various data in the test process in real time, such as load, displacement, time, etc., and can accurately control the test parameters.
Safety performance:The tester should have perfect safety protection measures, such as overload protection, emergency stop button, etc., to ensure the safety and reliability of the test process.
Send product request
Other supplier products
 |
IBC cleaning systems,ibc cleaning equipment,high pressure ibc washer | Model Semi-automatic IBC tote washer Spray angle 360° Material stainless steel Max. Pressure 150 bar Voltage 380V (or on request) Voltage of IB... |
 |
Fabric horizontal burning tester | Standard QB/T 2729: Leather – Horizontal flammability test for physical and mechanical properties. ASTM D5132: Horizontal burning rate of p... |
 |
Fully Automatic Vision Measuring Machine | Standards： JJF 1318-2011 Product advantages: 1. full mouse, handle type automatic control, simple to use, high efficiency, good stability 2. ca... |
 |
Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester-QINSUN | Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc... |
 |
Pneumatic fabric dilatometer-QINSUN | Main Purpose Primarily used to test the bursting strength and bursting expansion of knitted fabrics, woven fabrics, nonwoven fabrics, laminated fa... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
