Automotive seat frame durability tester
Applicable standards:
GB 11550-2009"Performance requirements and test methods for car seat headrest" : Appendix B of this standard specifies the requirements and test methods for energy absorption test, which is suitable for the impact strength test of car seat headrest.
GB 15083-2006"Automobile seats, seat fixtures and headrest strength requirements and test methods" : Appendix C of this standard specifies the requirements and test methods of seat energy absorption test, which is also applicable to the impact strength test of car seat headrest.
ECE R21, R17, R80and other EC regulations: These regulations regulate the strength and safety of car seats and their components （including headrests） and contain relevant impact strength testing requirements.
Main parameters:
| Parameter | Description |
|---|---|
| Impact speed | The impact speed of the tester is usually between 25 and 30 km/h, serving as a critical parameter to simulate vehicle collision or deceleration. The specific speed value should be determined based on test criteria and seat type. |
| Impact head type | The impact head type is a component designed to simulate the shape and mass of a passenger's head. Its parameters, such as diameter and equivalent mass, must comply with relevant standards. A common impact head has a diameter of 165 mm and an equivalent mass of approximately 6.8 kg. |
| Measurement accuracy | The tester's measurement accuracy includes parameters like impact velocity and acceleration measurement accuracy, which determine the precision and reliability of test results. Typically, impact velocity measurement accuracy should be around ±1%, and acceleration measurement accuracy should be approximately ±3%. |
| Adjustment range | The tester's impact arm usually has a wide adjustment range in the Z-direction to accommodate various seat types and testing requirements. Additionally, the impact arm's angle can be adjusted to simulate collisions at different angles. |
| Data acquisition and processing | The tester must be equipped with a high-speed data acquisition system capable of real-time recording of test data, such as impact speed, acceleration, and deceleration. The system should also support subsequent data processing and analysis to generate accurate test results. |
| Safety protection | The tester must include comprehensive safety measures, such as safety nets, emergency stop buttons, etc., to ensure the safety and reliability of the testing process. |
Send product request
Other supplier products
 |
Pilling Tester for Fabric & Textile Durability Tester-QINSUN | Standard AATCC 135(Dimensional Changes in Automatic Home Laundering) ISO 12945-2(Textiles - Determination of Fabric Propensity to Surface Fuzzing... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
New energy wire and cable extrusion & scraping tester | Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ... |
 |
Geosynthetic Transmissivity Tester | Scope of application: It is used to measure the characteristics of the plastic drainage plate in the plane direction of the water flow under the s... |
 |
Smoke toxicity test equipment for building materials | Standards ASTM D2843 Smoke Density Test GBT20285-2006 DIN53436 JIS1321 Application Smoke Toxicity Tester Flammability Analyzer for Building M... |
Same products
 |
Seat Bumping and Creep Test Bench | Seller: Standard International Group (HK) Limited | This test bench is used for simulating the car seat bumping and creep situation when a car is run... |
 |
Automobile seat belt fixed point test bench | Seller: Standard International Group (HK) Limited | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtur... |
 |
Impact strength tester for car seat headrest | Seller: Standard International Group (HK) Limited | Applicable standards: GB 15083-2006 "Automobile seats, seat fixtures and headrest strength requi... |
 |
Impact strength tester for car seat launching headrest | Seller: Standard International Group (HK) Limited | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, w... |
 |
Automobile Headrest Strength Tester | Seller: Standard International Group (HK) Limited | Applicable standards: GB 11550-2009"Automobile seat headrest strength requirements and test me... |
