Seat Belt Abrasion Tester-QINSUN
Standard：
ISO 10555(Seat Belt Assemblies - Test Methods for Abrasion Resistance)
ECE R16(Uniform Provisions Concerning the Approval of Safety Belts and Restraint Systems)
FMVSS 209(Federal Motor Vehicle Safety Standard for Seat Belt Assemblies)
Product Advantages：
Precision Abrasion Testing
High-resolution force sensor (±0.01 N accuracy) captures subtle webbing degradation, critical for ensuring post-crash performance.
Automated Test Cycles
Programmable waveforms simulate decades of real-world usage (e.g., seat belt retraction, emergency locking) in days.
Advanced Material Analytics
AI-powered software predicts wear patterns, tracks fraying, and generates ISO/ASTM-compliant reports automatically.
User-Centric Design
15.6-inch touchscreen interface with multilingual support (English, German, Chinese, Spanish) and one-touch test protocol selection.
Industrial Durability
Corrosion-resistant frame, IP65 enclosure, and anti-vibration feet ensure long-term reliability in demanding labs.
Product Features
Multi-Mode Testing:
Abrasion Resistance: Applies oscillating friction (0–50 N) at angles up to ±45°.
Load Retention: Measures webbing tensile strength after 100.000+ cycles.
Temperature Control: -30°C to +80°C chamber for accelerated aging tests.
Real-Time Monitoring:
High-speed cameras (2.000 FPS) capture webbing fraying and edge wear.
Data Management:
Cloud-compatible software stores 100.000+ test results, generates ECE/FMVSS reports, and supports barcode scanning.
Universal Specimen Compatibility:
Adjustable clamps accommodate all webbing types (polyester, nylon, Kevlar®).
Accessories Included
Specimen Clamps: Adjustable fixtures for polyester, nylon, and Kevlar® webbing.
Calibration Kit: Force sensor, angular encoder, and NIST-traceable certification.
Safety Gear: Heat-resistant gloves, face shield, and emergency eyewash station.
User Manual & Software: Digital guide (multilingual) + AI analytics platform for fatigue life prediction.
Environmental Chamber: Temperature-controlled enclosure with antifreeze additive.
Ideal For:
Automotive OEMs (seat belt manufacturers, safety systems R&D labs)
Regulatory testing agencies (ECE, FMVSS compliance)
Aerospace seating durability testing
Consumer product safety laboratories
Technical Parameters
| Parameter | Specification |
|---|---|
| Abrasion Force Range | 0–50 N (±0.01 N accuracy) |
| Angular Adjustment | ±45° (±0.01° resolution) |
| Frequency Range | 0.1–15 Hz (adjustable) |
| Temperature Control | -30°C to +80°C (±0.5°C accuracy) |
| Data Acquisition Rate | 150.000 Hz (force/angular channels) |
| Power Supply | 220V/110V AC, 50/60Hz, 2.5kW |
| Dimensions (L×W×H) | 1.3×0.9×1.8 m |
| Weight | 380 kg |
| Operating Environment | 5–40°C, ≤85% RH (non-condensing) |
Qinsun Instruments Co., LTD is a professional laboratory testing instrument manufacturer in China,Have been focusing on laboratory instrument R&D more than 30 years and have rich industry experience,Based on international testing standards,We are also the instrument supplier for BV SGS laboratory,We provide one-stop solutions for lab instruments,Free Training and Turn-Key Service,Products exported all over the world,Offer 36 month warranty and are a trustworthy partner.
Send product request
Other supplier products
 |
Geomembrane Hydrostatic and Permeability Tester-QINSUN | Scope of application: It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cl... |
 |
Automobile seat belt fixed point test bench | Applicable standards: National mandatory standards: GB 15083-2006"Automobile seats, seat fixtures and headrests strength requirements and test me... |
 |
Automotive interior Flame Retardant Tester | StandardsGB 8965-1998 Flame-retardant protective clothing Appendix B test methods for flame exposure times of seamsTB/T 3138-2006 Technical speci... |
 |
Car seat belt locking performance tester | Applicable standards: Automotive seat belt locking performance tester mainly meets the following national or industry standards: GB 14166-2013Sea... |
 |
Thermal Insulation Tester | Meet the standard JIS L1018.34.1A method/Knitted fabrics test methods, heat retention (constant temperature method) JIS L1096 8.28.1A method/Gene... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
