Spray Rating Tester

• 

Standards:

ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23

Applications:

Spray Rating Tester is used to determine the surface wetting resistance of fabrics.

Information:

The Spray Testercomprises a metal framework allowing distilled water to be sprayed through a nozzle onto a test specimen at 45° and 150mm below. The appearance of the specimen is compared against an optional photographic scale to rate.

Features:

1. The instrument structure is simple, mainly by the main frame, funnel, nozzle, sample holder and sample holder;

2. Nozzle have a total of 19 aperture evenly distributed, the aperture required by the standard custom. 250ml of water poured into the funnel can flow out of the nozzle within 25-30s;

3. The racks on the upper edge of the racks are at a 45 ° angle to the horizontal;

4. The center of the upper edge of the sample holder ring, ie the distance from the center of the sample to the nozzle, is 150 mm.

Parameters:

1. Structure: stainless steel;

2. Surface treatment: painting;

3. Dimensions: 230 × 250 × 500mm (length × width × height);

4. Weight: 5kg (11lb).

Other supplier products

	Air - tightness Testing Device for Automotive Connectors	The air - tightness testing device for automotive connectors uses the pressure principle to conduct non - destructive tightness tests on containe...
	Xenon Arc Weather Ometer SI4000	Introduction SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natural climate and sunlight conditions. It is suitable for te...
	Nail Hammer Snag Tester-QINSUN	The nail hammer snag tester is mainly used to evaluate the ability of fabrics to resist snag. Structure and principle Structure: It is generally...
	Geosynthetic creep tester	Scope of application: DW1290 series geosynthetics creep test system is used to determine the tensile creep properties of geosynthetics products. ...
	Fogging Tester for Automotive & Textile Materials-QINSUN	Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics &mdash...

Same products

	HDPE High Speed Water Cooled Double Wall Corrugated Pipe Extrusion Line	Seller: Shandong HUASU Plastic Technology Co.,Ltd.	The molds adopt the double flow channel structure and nitriding polishing processed die head. Thi...
	PanEVAP & MVR system	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	A multiple-effect evaporator is a device that efficiently uses steam heat to evaporate water. Wat...
	PanGAP wide gap welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanGAP wide gap welded plate heat exchangerconsists of a welded plate pack with different channel...
	PanBloc welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBloc welded plate heat exchangeris compact and efficient, although fully welded, is totally ac...
	PanBox welded plate heat exchanger	Seller: Yangzhou Panstar Heat Exchanger Equipment Co., Ltd	PanBox welded plate heat exchangerconsists of a laser welded plate pack with optimized corrugated...