Dry Cleaning & Washing Cylinder
Introduction
The dry cleaning and washing cylinder consists of a stainless steel rotary test chamber and a multi-speed drive with a digital timer.
It is used to test the color fastness for the dry cleaning and chlorine water washing fabrics.
Standards
AATCC 162 Colorfastness to water: Chlorinated pool.
16CFR PART 1610Standard for the flammability of clothing textiles.
Application
Dry cleaning and washing cylinder is designed to determine the color fastness for the dry cleaning and chlorinated pool water, with the aim to prepare samples for flammability testing.
Operation
●Clean the dry cleaning cylinder
●prepare the hardness concentrates according to the relevant standards.
●51 ml of the hardness concentrate was diluted to 5100 ml with distilled or deionized water.
●If necessary, adjust the pH of the solution to 7.0 with sodium carbonate or acetic acid.
●5000 ml of the solution (made in the above 3) was charged into a dry-cleaning cylinder. The temperature was adjusted to 21 ° C.
●Put the color test sample with the standard test fiber into the cylinder, turn off the barrel, and roll for 60 minutes.
●Get out the sample and remove the excess solution.
Technical Parameters
| Items | Parameters |
| Dimension | 72L X 49W X 62H (cm) |
| Structure | Stainless steel |
| Surface treatment | Wiredrawing treatment |
| Transport weight | 80kg |
| Power supply | 220V 50HZ max.0.05A |
Send product request
Other supplier products
 |
Melt Mass-Flow Rate Test Machine, ASTM D1238-98 | This machine is deisgned according to ISO1133. ASTM D1238-98 ,ISO1133; Melt flow rate was measured using automatic sampling, weighing scales manner... |
 |
ozone exposure test equipment | 1. Equipped with a high efficiency ozone generator. It is also equipped with HMOS sensor, ozone concentration of 5ppm, control accuracy of ±... |
 |
Yarn Loop Length Tester | Compliance Standards FZ/T 70001-2003. FZ/T 71004-2003 Scope of Application Determines loop length of various yarns and knitted loops. Verifies c... |
 |
Universal Finger Abrasion Tester | Universal Finger Abrasion Tester can simulate virtually all wear processes involving products and fingers/skin, and realistically replicate liquid ... |
 |
Room Corner Test Machine, ISO 9705. En 14390 | According to ISO 9705 of building materials fire prevention performance standards, this machine control platform to provide independent gas analysi... |
