Mullen Bursting Strength Tester
Standard
ASTMD3786.AS2001.2.4.BSENISO13938-1.GB/T7742.ISO13938-1.JISL1018/L1093.IWSTM170
Application
Mullen burst strength tester is mainly used to determine the bursting strength or bursting strength of seams for the knitted fabrics, knitted fabrics, non-woven fabrics and paper, leather.
Main models
Common models for the C, A
Instrument features
1. the use of Mitsubishi 16-bit industrial-level MCU control, with strong anti-interference ability;
2. Equipped with Putian MT-300K printer, a test report can be printed with the output data.
Technical Parameters
Motor: 120W variable-speed motor
Sensor: Pressure transducer
Control: Touchscreen
Screw: Ball screw
Capacity: High pressure 250kPa to 5600kPa
Low pressure (optional): 50kPa to 1600kPa
Maximum load force: 5000kPa
Maximum stroke: 25mm (without clamp)
Resolution: 0.1kPa
Clamp ring material: SUS#304 stainless steel
Clamp ring inner diameter: Upper clamp ring inner diameter Φ31.5 ± 0.1mm, lower clamp ring inner diameter Φ31.5 ± 0.1mm
Clamping force range: 600kPa to 1200kPa
Units: kPa, Lbs/in², kgf/cm²
Hydraulic fluid: Silicone oil 100%
Pressure speed High pressure: 170 ± 15 ml/min
Low pressure (optional): 95 ± 5 ml/min
Dimensions: Approximately 400 mm × 380 mm × 750 mm (L × W × H)
Weight: Approximately 50 kg
Air pressure: ≥ 0.6 MPa
Power supply: 1∮ AC 220V
Power: Approximately 300 W
Send product request
Other supplier products
 |
Pendulum Impact Tester | 1. Function and Application The Pendulum Impact Tester is designed to evaluate automotive seating systems for compliance with head impact requirem... |
 |
Rubbing alcohol testing equipment | Theabrasion tester for mobilecomplies withUL817 and other relevant standards "special rubber fixed to the machine friction rub hammer surface to a ... |
 |
Automobile Sealing Strip Wear Test Machine | The TL52057 automotive sealing strip abrasion tester is a professional device specifically designed to evaluate the abrasion resistance of sealing ... |
 |
Capillary rheometer | The Capillary Rheometer is a computer-controlled laboratory instrument used for determining the rheological properties of molten plastics and polym... |
 |
Impact strength tester for car seat manufacturer | 1. Product Overview The Impact Strength Tester for Car Seat Headrest is a specialized testing system designed to evaluate the headrest’s res... |
Same products
 |
Blanket Flammability Test Machine | Seller: Standard Groups | Bed Blanket Flammability Tester-It is mainly used for testing the flame retardant performance of ... |
 |
High Temperature Oxygen Index Tester | Seller: Standard Groups | The High-Temperature Oxygen Index (TOI) measuring instrument determines oxygen index at up to 125... |
 |
Limiting Oxygen Index Tester | Seller: Standard Groups | The Limiting Oxygen Index Tester measures the minimum oxygen concentration needed to sustain comb... |
 |
Vertical Flammability Tester | Seller: Standard Groups | Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwe... |
 |
45 Degree Flammability Tester | Seller: Standard Groups | Application 45 Degree Flammability Tester is used to determine the burning characteristics of te... |
