Heel Fatigue Tester
Heel Fatigue Tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Application:
The heel fatigue tester is used to determine the resistance of medium and high heels of ladies’ shoes under repeated small impacts to the heel tip.
Procedure：
Clamp the heel on the machine, adjust the height position and angle of the heel according to the equipment, adjust the hammer in the horizontal position, pre-set the number of impacts, start the equipment. The hammer would impact the heel with the specified energy of 0.68J, 60 cycles per minute. Continuous testing until the heel breaks or reaches the specified number of impacts, the equipment automatically stops, and the number of impacts is recorded. This test method is used to assess the resistance of the heel to the repeated impact with certain mass.
Feature：
A heel is subject to blows of specified energy, delivered by a pendulum under a specified frequency, testing continues until failure of the heel takes place or satisfactory fatigue resistance is achieved.
parameters：
Impact Energy：0.68J / blow
Impact Frequency：60 blows /min
Adjustable Range of Base Clamp：90mm (H), 80mm (W), angle 0~180°
Counter LCD：0~999,999
Main unlt：46×46×75cm
Control box：18×21×20cm
Weight：70kg
Power Supply：1∮ AC 220V,3A
Standards:
BS-5131 4.9,
ISO 19956
SATRA TM21,
QB/T2864
Send product request
Other supplier products
 |
Textile Flatness Tester - lab instrument | TheTextile Flatness Testeris a precision instrument designed to evaluate fabric surface evenness by quantifying thickness variation, weave irregula... |
 |
Thermal Protective Performance Tester (TPP) - Test Equipment | The Thermal Protective Performance (TPP) Test Device was developed to measure the time elapsed for convective and radiant heat to penetrate through... |
 |
Gloves Cut Resistance Testing Machine | The Gloves Cut Resistance Testing Machine is designed for evaluating the cutting resistance of safety gloves, protective gloves, leather, and other... |
 |
Sandwich-Type Quick Color Change Spray Booth - Test Equipment | Our Powder Coating Booths with integrated cyclone systems are designed to maximize powder recovery, reduce waste, and ensure a clean, efficient coa... |
 |
Robot HEPA ULPA Filter Scanning System | The Robot HEPA/ULPA Filter Scanning Detection System is designed to evaluate both overall and local particle filtration efficiency of 2D and 3D fil... |
Same products
 |
Air Intake Filter Test System | Seller: Standard Groups | The Air Intake Filter Test System is designed for testing industrial air filters and engine air f... |
 |
Mattress Spring Fatigue Tester，ASTM D3574 ，how to test mattress for sagging | Seller: Standard International Group (HK) Limited | The King Size Foam Fatigue Tester is a single-station pneumatic fatigue testing system designed f... |
 |
Mattress Rollator，ASTM F1566 ，Mattress Durability Tester，Mattress Fatigue Tester | Seller: Standard International Group (HK) Limited | The Mattress Rollator is a laboratory durability testing system designed to evaluate the long-ter... |
 |
HD2 Pneumatic Foam Fatigue Tester，ISO 3385，Foam Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The HD2 Pneumatic Foam Fatigue Tester is a heavy-duty, single-station laboratory testing machine ... |
 |
VW Heel Abrasion Tester，ISO 4649 ，Heel Performance Testing Machine | Seller: Standard International Group (HK) Limited | The VW Heel Abrasion Tester is designed to evaluate the wear resistance of floor covering materia... |
